Operating instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages

If the END or DRYING indicator on the programme progress display is flashing, you can probably rectify the fault yourself.

After rectifying an END or DRYING fault, press the button for the wash programme that has been started. The wash programme should continue. If the fault is displayed again, contact AEG Service Force.

If indicators for other programme steps on the programme progress display are flashing, please contact AEG Service Force and state the fault indicated.

Symptom

Possible Cause

Solution

 

Tap is closed.

Open tap.

END on the pro-

 

 

The filter (where present) in

 

gramme progress dis-

Clean the filter in the

the threaded hose fitting is

play is flashing:

threaded hose fitting.

blocked.

no water is running

 

 

 

into the dishwasher.

The water inlet hose is not

Check hose installation.

 

correctly laid.

 

 

DRYING on the pro-

The sink outlet is blocked.

Clean the sink outlet.

 

 

gramme progress dis-

The water drain hose is not

Check hose installation.

play is flashing.

correctly laid.

 

 

END and DRYING on

The leak prevention system

Close the tap and contact

the programme

has been triggered.

AEG Service Force.

progress display are

 

 

flashing simultane-

 

 

ously.

 

 

 

 

 

26

Page 26
Image 26
Electrolux 5070 manual What to do, if, Error messages, Symptom Possible Cause Solution, END and Drying on