20
Gigabit Unmanaged Switch
Note: The figure is to illustrate the applic ation and principle. The power plug you get
from the pa ckage and th e socket in your situation will comply with the regulation in
your country, so they may differ from the figure above.
Initialization212 For TL-SG1048/TL-SG102 4/TL-SG1024D/TL-SG1016/TL-SG1016D/TL-S G1008:
After the device i s powered on, it b egins the Power-On Self-Test. A series of tests run
automatically to ensure the device functions prope rly. During this time, its LED indica-
tors will respond as follows:
All of the LED indicators will flash momentarily for one second, which repre sents a
■
resetting of the system.
The Power LED indicator will light up.
■
For TL-SG1008PE:
The LED indicators for TL-SG1008PE are classified into two parts:
The LEDs indicat ing switch stat us including Power LED, Link/Act LED s and 1000Mbps
LEDs; the LEDs indicating PSE status, including PoE MAX LED and PoE St atus LEDs.
After the device i s powered on, it b egins the Power-On Self-Test. A series of tests run
automatically to ensure the device functions prope rly. During this time, its LED indica-
tors will respond as follows:
All of the LEDs in dicating swith status will flash momentarily for one second, which
■
represents a reset ting of the swit ch system. The P oE MAX LED will keep on for
approximately ten sec onds, representing a resetting of the PSE system. Take note
that the PoE Status LEDs won't light up during this period.
The Power LED indicator will light up.
■
Connection