02
Gigabit Unmanaged Switch
Supports IEEE802.3x flow control for full-duplex mode and backpressure for half-•
duplex transfer mode
Non-blocking switching ar chitecture that forwards and filters p ackets at full wire -•
speed for maximum throughput
Supports MAC address auto-learning and auto-aging•
Desktop and rack-mountable steel case•
Internal power supply•
For TL-SG1008PE:
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE8 02.3af and •
IEEE802.3at standards
8 10/100/1000Mbps Auto-Negotiation R J45 ports all supporting Po E function and •
Auto-MDI/MDIX
Supports PoE power up to 124W for all PoE ports•
Supports PoE IEEE802.3af/IEEE802.3at-compliant PDs•
Supports IEEE802.3x flow control for Full-duplex Mode and bac kpressure for Half-•
duplex Mode
8K entry MAC address table of the TL-SG1008PE with auto-learning and auto-aging•
Internal power supply•
ACCearanceC11 Front Panel
■
The front panel of TL-SG1048 is shown as the following figure.
Power
TL-SG1048
48-Port Gigabit Switch
46810 12 14 163 5 7 9 11 13 1512
1000Mbps
10/100Mbps
activity
29 30 31 3218 20 22 24 25 26 27 2817 19 21 23 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
LEDs
10/100/1000Mbps RJ45 Port
Front Panel of TL-SG1048Figure 1-1
LEDs
LED Status Indication
Power On The switch is powered on.
Off The switch is powered off or power supply is abnormal.
Link/Act
On Green
A 1000Mbps device is connected to the corresp onding port.
Yellow
A 10/100Mbps device is connected to the corresponding port.
Flashing The corresponding port is transmitting or r eceiving data.
Off There is no device linked to the corresponding port.
Introduction