Use Of Dishwasher Salt, Use Of Detergent And Rinse Aid

2.Turn the programme knob clockwise until the programme marker agrees with the first available washing programme on the control panel.

3.Release the start/cancel button when the on/off and the start/cancel indicator lights start to flash.

4.At the same time, the end-of-pro- gramme indicator light starts to flash. The number of flashes shows the cur- rent adjustment.

Example: 5 flashes / pause / 5 flashes = level 5.

electrolux 7

5.Press the start/cancel button to change the adjustment. Each time you press the start/cancel button, the adjustment goes to the subsequent level.

6.Switch off the appliance to keep the op- eration.

If the water softener is set electronically to the level 1, the salt indicator light stays off.

USE OF DISHWASHER SALT

1. Turn the cap counterclockwise and open the salt container.

2. Fill the salt container with 1 litre of water (only for the first time you fill with salt).

3. Use the funnel to fill the salt container with salt.

4. Remove the salt around the opening of the salt container.

5. Turn the cap clockwise to close the salt container.

It is correct that water comes out from the salt container when you fill it with salt.

To help the environment, do not use more than the correct quantity of deter- gent.

Follow the detergent manufacturer rec- ommendations on the detergent pack- aging.

Do these steps to fill the detergent dispens- er:

1.Press the release button 2 to open the lid 8 of the detergent dispenser.

2.Put the detergent in the dispenser 3 .

3.If the washing programme has a pre- wash phase, put a small quantity of de-

tergent in the prewash detergent com- partment 1 .