8electrolux
4.If you use the detergent tablets, put the tablet in the detergent dispenser 3 .
5.Close the detergent dispenser. Press the lid until it locks into position.
Different brands of detergent dissolve in different times. Some detergent tab- lets do not have the best cleaning re- sults during short washing pro- grammes. Use long washing pro- grammes when you use the detergent tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Do these steps to fill the rinse aid dispens- er:
1.Press the release button 5 to open the lid 7 of the rinse aid dispenser.
2.Fill the rinse aid dispenser 4 with rinse aid. The mark 'max' shows the maxi- mum level.
3.Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the washing programme.
4.Close the rinse aid dispenser. Press the lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 4.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage).
Turn the rinse aid selector 6 to increase or decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents.
When you use tablets, that contain salt and rinse aid, do not fill the salt container and rinse aid dispenser. The rinse aid indicator stays on when the appliance is activated. Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the prod- ucts).
1.Adjust the water hardness to the lowest level. Refer to 'Setting the water soften- er'.
2.Set the rinse aid dosage to the lowest position.
Using again separately detergent, salt and rinse aid
1.Fill the salt container and the rinse aid dispenser.
2.Adjust the water hardness to the highest level.
3.Start a washing programme without dishes.
4.When the washing programme is com- pleted, adjust the water softener to the water hardness in your area.
5.Adjust the quantity of rinse aid.
LOADING CUTLERY AND DISHES
Hints and tips
•Do not put in the appliance items that can absorb water (sponges, household cloths).
•Remove the remaining food from the items.
•Make soft the remaining burned food on the items.
•Put hollow items (cups, glasses and pans) with the opening down.
•Make sure that water does not collect in containers or in bowls.
•Make sure that cutlery and dishes do not bond together.
•Make sure that the glasses do not touch other glasses.
•Put small items in the cutlery basket.
•Mix the spoons with other cutlery to pre- vent them to bond together.
•When you put the items in the baskets, make sure that the water can touch all surfaces.
•Put light items in the upper basket. Make sure that the items do not move.
•Water droplets can collect on plastic items and
