Agilent Technologies 34401A manual Execution Errors 112, 113, 121, 123, 124, 131, 138, 148

Chapter 5 Error Messages

Execution Errors

-112	Program mnemonic too long
	A command header was received which contained more than the
	maximum 12 characters allowed. Example: CONFIGURATION:VOLT:DC
-113	Undefined header
	A command was received that is not valid for this multimeter. You may
	have misspelled the command or it may not be a valid command. If you
	are using the short form of the command, remember that it may contain
	up to four letters. Example: TRIGG:COUN 3
-121	Invalid character in number
	An invalid character was found in the number specified for a parameter
	value. Example: STAT:QUES:ENAB #B01010102
-123	Numeric overflow
	A numeric parameter was found whose exponent was larger than 32,000.
	Example: TRIG:COUN 1E34000
-124	Too many digits
	A numeric parameter was found whose mantissa contained more than
	255 digits, excluding leading zeros.
-131	Invalid suffix
	A suffix was incorrectly specified for a numeric parameter. You may
	have misspelled the suffix. Example: TRIG:DEL 0.5 SECS
-138	Suffix not allowed
	A suffix was received following a numeric parameter which does not
	accept a suffix. Example: SAMP:COUN 1 SEC (SEC is not a valid suffix).
-148	Character data not allowed
	A discrete parameter was received but a character string or a numeric
	parameter was expected. Check the list of parameters to verify that you
	have used a valid parameter type. Example: DISP:TEXT ON

174