Agilent Technologies 34401A manual Execution Errors

Chapter 5 Error Messages

Execution Errors

	Execution Errors
-101	Invalid character
	An invalid character was found in the command string. You may have
	inserted a character such as #, $, or % in the command header or within
	a parameter. Example: CONF:VOLT#DC
-102	Syntax error
	Invalid syntax was found in the command string. You may have
	inserted a blank space before or after a colon in the command header,
	or before a comma. Example: SAMP:COUN ,1
-103	Invalid separator
	An invalid separator was found in the command string. You may have
	used a comma instead of a colon, semicolon, or blank space – or you may
	have used a blank space instead of a comma. Example: TRIG:COUN,1
	or CONF:FREQ 1000 0.1
-104	Data type error
	The wrong parameter type was found in the command string. You may
	have specified a number where a string was expected, or vice versa.
	Example: DISP:TEXT 5.0	5
-105	GET not allowed
	A Group Execute Trigger (GET) is not allowed within a command string.
-108	Parameter not allowed
	More parameters were received than expected for the command.
	You may have entered an extra parameter, or you added a parameter
	to a command that does not accept a parameter. Example: READ? 10
-109	Missing parameter
	Fewer parameters were received than expected for the command.

You omitted one or more parameters that are required for this command. Example: SAMP:COUN

173