Pioneer VSX-84TXSI Other Settings, The Other Setup menu, indicate, possible assignments, Input

09Other Settings

•12V Trigger 1 / 2 – After connecting a component to one of the 12 volt triggers (see Switching components on and off using the 12 volt trigger on page 60), select M. ROOM, ROOM2, ROOM3 or OFF for the corresponding trigger setting to switch it on automatically along with the (main or sub) room specified.

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

•PDP In (SR+) – To control certain functions on this receiver from a plasma display, select the display input to which you’ve connected the receiver.1

7When you're finished, press RETURN. You will return to the System Setup menu.

Input function default and possible settings

The terminals on the rear of the receiver generally correspond to the name of one of the input source functions. If you have connected components to this receiver differently from (or in addition to) the defaults below, see The Input Setup menu above to tell the

receiver how you’ve connected up. The dots (			) indicate
possible assignments.
Input	Input Terminals
source	Digital i.LINK	HDMI Component S-Video
DVD/LD	COAX 1		IN 1
TV			IN 2
SAT	OPT 1
DVR/VCR1	OPT 2		(Fixed)
DVR/VCR2	OPT 3		(Fixed)
VIDEO/GAME1
VIDEO/GAME2	(Fixed)		(Fixed)
HDMI 1		(HDMI-1)
HDMI 2		(HDMI-2)
HDMI 3		(HDMI-3)
HDMI 4		(HDMI-4)
(VSX-84TXSi )
USB
XM
CD	COAX 2
CD-R/TAPE/MD	OPT 4
TUNER
PHONO
MULTI CH IN
iPod
iLINK

	INPUT		SYSTEM OFF
RECEIVER			SOURCE	D.ACCESS	+10			CLASS
	SELECT							DISC
								ENTER
				AV PARAMETER				CH LEVEL
				TOP MENU				MENU
						TUNE
				DTVMENU ST			ST	T.EDIT
				SETUP		ENTER		RETURN
				CATEGORY		TUNE	BAND
				GUIDE
CD	TV	VIDEO 2				TV CONTROL
DVD	SAT	VIDEO1	TVCONT
				TV VOL	INPUT		TV CH	VOL
DVR2	CD-R	XMRADIO	ROOM2/3		SELECT
DVR1	i Pod	TUNER	RECEIVER

SLEEPVIDEOANALOG

1Switch on the receiver and your TV. Use the RECEIVER button to switch on.

2Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use the buttons and ENTER to navigate through the

screens and select menu items. Press RETURN to confirm and exit the current menu.

3Select ‘Other Setup’ then press ENTER.

System Setup			7.Other Setup
	1.Auto	MCACC
				a.Multi	Room Setup
	2.Surr	Back System		b.SR+	Setup
	3.Manual MCACC			c.OSD	Adjustment
	4.Data	Management		d.i.LINK Check
	5.Manual SP Setup
	6.Input	Setup
	7.Other	Setup
		: Exit			:Return

4 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•Multi Room Setup – Specify your volume setting for a multi-room setup (see Multi-Room Setup below).

•SR+ Setup – Specify how you want to control your Pioneer plasma display (see SR+ Setup for Pioneer plasma displays below).

•OSD Adjustment – Adjust the position of the on- screen display on your TV (see OSD Adjustment below).

•iLINK Check (VSX-84TXSi only) – Check which i.LINK- equipped components you have connected, and which input function they are assigned to (Checking the i.LINK inputs on page 52).

5Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Note

1You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite from the setup in Using this receiver with a Pioneer plasma display on page 60). Note that to control this receiver using the remote, you will have to point it at the plasma display’s remote sensor after making this connection.

64

En