Pioneer VSX-84TXSi-S, VSX-82TXS Listening to your system Chapter, Listening in surround sound

Listening to your system 05

Chapter 5:

Listening to your system

Important

•The listening modes and many features described in this section may not be available depending on the current source, settings and status of the receiver.

See Listening modes with different input signal formats on page 86 for more on this.

Listening in surround sound

Using this receiver, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source you’re listening to.

If you connected surround back speakers, see also Using surround back channel processing on page 30.

Auto playback

There are many ways to listen back to sources using this receiver, but for the simplest, most direct listening option is the Auto Surround feature. The receiver automatically detects what kind of source you’re playing and selects

multichannel or stereo playback as necessary.1

	PHOTO
STATUS	SIGNAL SEL	SBch	STEREO
MULTI OPE	THX	STANDARD	ADV. SURR

SHIFT PHASE MCACC S.DIRECT

RECEIVER

•While listening to a source, press S.DIRECT (AUTO

SURR/STREAM DIRECT)2 for auto playback of a source. AUTO SURROUND shows briefly in the display before showing the decoding or playback format. Check the digital format indicators in the front panel display to see how the source is being processed.

•When listening to XM Radio, the XM HD Surround feature is selected automatically (see Using XM HD Surround on page 49 for more on this).

Standard surround sound

The following modes provide basic surround sound for stereo and multichannel sources.3

STATUS	SIGNAL SEL	SBch	STEREO
MULTI OPE	THX	STANDARD	ADV. SURR

SHIFT PHASE MCACC S.DIRECT

RECEIVER

•While listening to a source, press STANDARD (STANDARD SURROUND).

If necessary, press repeatedly to select a listening mode.

•If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically be selected and shows in the display.4

With two channel sources, you can select from:

•2 Pro Logic IIx MOVIE – Up to 7.1 channel sound, especially suited to movie sources

•2 Pro Logic IIx MUSIC – Up to 7.1 channel sound, especially suited to music sources5

•2 Pro Logic IIx GAME– Up to 7.1 channel sound, especially suited to video games

•2 PRO LOGIC – 4.1 channel surround sound (sound from the surround speakers is mono)

•Neo:6 CINEMA – 6.1 channel sound, especially suited to movie sources

•Neo:6 MUSIC – 6.1 channel sound, especially suited to music sources6

With multichannel sources, if you have connected surround back speaker(s) and have selected SBch ON, you can select (according to format):

Note

1• Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening in surround sound above for more on these decoding formats).

• The Auto Surround feature is canceled if you connect headphones or select the multichannel analog inputs.

2For more options using this button, see Using Stream Direct on page 29.

3In modes that give 6.1 channel sound, the same signal is heard from both surround back speakers.

4If surround back channel processing (page 30) is switched OFF, or the surround back speakers are set to NO (this happens automatically if the Surround back speaker setting on page 36 is set to anything but Normal (SB)), 2 Pro Logic IIx becomes 2 Pro Logic II (5.1 channel sound).

5When listening to 2-channel sources in Dolby Pro Logic IIx Music mode, there are three further parameters you can adjust: Center Width, Dimension, and Panorama. See Setting the AV options on page 66 to adjust them.

6When listening to 2-channel sources in Neo:6 Music mode, you can also adjust the center image effect (see Setting the AV options on page 66).

27

En