Pioneer Comprehensive Guide to VSX-82TXS and VSX-84TXSI Home Theater Systems

5 minute guide

Chapter 2:

5 minute guide

Introduction to home theater

Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert. The surround sound you get from a home theater system depends not only on your speaker setup, but also on the source and the sound settings of the receiver.

This receiver will automatically decode multichannel Dolby Digital, DTS, or Dolby Surround sources according to your speaker setup. In most cases, you won’t have to make changes for realistic surround sound, but other possibilities (like listening to a CD with multichannel surround sound) are explained in Listening to your system on page 27.

Listening to Surround Sound

This receiver was designed with the easiest possible setup in mind, so with the following quick setup guide, you should have your system hooked up for surround sound in no time at all. In most cases, you can simply leave the receiver in the default settings.

•Be sure to complete all connections before connecting this unit to an AC power source.

1 Connect your TV and DVD player.

See Connecting your TV and DVD player on page 12 to do this. For surround sound, you’ll want to hook up using a digital connection from the DVD player to the receiver.

2Connect your speakers and place them for optimal surround sound.

Connect your speakers as shown in Installing your speaker system on page 17.

Where you place the speakers will have a big effect on the sound. Place your speakers as shown below for the best surround sound effect. Also see Placing the speakers on page 18 for more on this.

Center (C)	Front
	Right (R)
Front
Left (L)	Subwoofer (SW)	Surround

	Right (SR)
	Surround
Listening	Back
	Right (SBR)
position
	Surround
	Left (SL)
	Surround
	Back Left (SBL)

02

3Plug in the receiver and switch it on, followed by your DVD player, your subwoofer and the TV.

Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with the TV if you don’t know how to do this.

•Set the subwoofer volume to a comfortable level.

4Use the on-screen automatic MCACC setup to set up your system.

See Automatically setting up for surround sound (MCACC) below for more on this.

5Play a DVD, and adjust the volume to your liking. Make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input is selected. If it isn’t, press DVD/LD on the remote control to set the receiver to the DVD input.

In addition to the basic playback explained in Playing a source on page 9, there are several other sound options you can select. See Listening to your system on page 27 for more on this.

See also Making receiver settings from the System Setup menu on page 34 for more setup options.

Automatically setting up for surround sound (MCACC)

The Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. After you have set up the microphone provided with your system, the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for your particular room.

Make sure you do this before moving on to Playing a source on page 9.

Important

•Make sure the microphone and speakers are not moved during the Auto MCACC Setup.

•Using the Auto MCACC Setup will overwrite any existing settings for the MCACC preset you select.

•Before using the Auto MCACC Setup the headphones should be disconnected.

Caution

•The test tones used in the Auto MCACC Setup are output at high volume.

7

En