12Additional information

Symptom

No sound from the surround or center speakers.

Remedy

•Check that the Stereo listening mode isn’t selected; select one of the surround listening modes (see Listening in surround sound on page 27).

•Check that the surround/center speakers are not set to NO (see Speaker Setting on page 43).

•Check the channel level settings (see Channel Level on page 44).

•Check the speaker connections (see Connecting the speakers on page 17).

No sound from surround back speakers.

•Check that the surround back speakers are set to LARGE or SMALL (see Speaker Setting on page 43).

•Make sure surround back processing is set to SBch ON (see Using surround back channel processing on page 30.

•If the source is Dolby Surround EX or DTS ES with no flag to indicate 6.1 compatibility, then with surround back processing set to SBch Auto, there will be no sound from the surround back speakers. In this case, set to SBch ON (see Using surround back channel processing on page 30).

•If the source does not have 6.1 playback channels, make sure that surround back processing is set to SBch ON and a surround mode is selected (see Listening in surround sound on page 27).

•Check the speaker connections (see Connecting the speakers on page 17). If only one surround back speaker is connected, make sure it’s connected to the left channel speaker terminal.

No sound from subwoofer.

• Check that the subwoofer is connected properly, switched on and the volume turned up.

 

• If your subwoofer has a sleep function, make sure it is switched off.

 

• Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 43).

 

• The crossover frequency may be set too low; try setting it higher to match the characteristics of your other

 

speakers (see Speaker Setting on page 43)

 

• If there is very little low frequency information in the source material, change your speaker settings to

 

Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS (see Speaker Setting on page 43).

 

• Check that the LFE channel is not set to –80 dB, or a very quiet setting (see Bass Peak Level on page 45).

 

• Check the speaker level settings (see Channel Level on page 44).

No sound from one speaker.

•Check the speaker connection (see Connecting the speakers on page 17).

•Check the speaker level settings (see Channel Level on page 44).

•Check that the speaker hasn’t been set to NO (see Speaker Setting on page 43).

•The channel may not be recorded in the source. By using one of the advanced effect listening mode, you may be able to create the missing channel (see Listening in surround sound on page 27).

Sound is produced from analog

• Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 30).

components, but not from digital

• Make sure that the digital input is assigned correctly for the input jack the component is connected to

ones (DVD, LD, CD-ROM etc.).

(see The Input Setup menu on page 63).

 

• Check the digital output settings on the source component.

 

• If the source component has a digital volume control, make sure this is not turned down.

 

• Make sure that the multichannel analog inputs are not selected. Select any other input source.

 

 

No sound is output or a noise is

• Check that your DVD player is compatible with Dolby Digital/DTS discs.

output when Dolby Digital/DTS

• Check the digital output settings of your DVD player. Make sure that the DTS signal output is set to On.

software is played back.

• If the source component has a digital volume control, make sure this is not turned down.

No sound when using the System Setup or Status menu.

•If the HDMI input source is selected, sound is muted until exiting either menu.

•If sound is muted in the sub room (ROOM 2), it will be restored after exiting the System Setup menu.

Other audio problems

Symptom

Remedy

Broadcast stations cannot be

For FM broadcasts

selected automatically, or there is

• Fully extend the FM wire antenna, adjust the position for best reception and secure to a wall, etc.

considerable noise in radio

• Use an outdoor antenna for better reception (see page 20).

broadcasts.

For AM broadcasts

 

• Adjust the position and direction of the AM antenna.

 

• Use an outdoor antenna for better reception (see page 20).

 

• Noise may be caused by interference from other equipment, such as a fluorescent light, motor, etc.

 

Switch off or move the other equipment, or move the AM antenna.

 

 

A multichannel DVD source

• Make sure that the multichannel analog inputs are selected (see Selecting the multichannel analog inputs

appears to be downmixed to 2

on page 54).

channels during playback.

 

Noise is output when scanning a • This is not a malfunction of the receiver. The scan function of your player alters the digital information,

DTS CD.

making it unreadable, resulting in noise being output. Lower the volume when scanning.

 

 

78

En

Page 77 Page 79
Page 78
Image 78
Pioneer VSX-84TXSI, VSX-82TXS-S, VSX-84TXSi-S manual Additional information, Other audio problems
Page 77 Page 79

VSX-84TXSi-S, VSX-82TXS, VSX-82TXS-S, VSX-84TXSI specifications

The Pioneer VSX-84TXSi, VSX-82TXS, VSX-84TXSi-S, and VSX-82TXS are part of Pioneer's renowned lineup of home theater receivers, notable for their impressive audio capabilities and advanced features. Designed for enthusiasts who appreciate high-quality sound, these receivers stand out in the crowded market of A/V receivers.

The VSX-84TXSi and VSX-84TXSi-S come equipped with a robust 7.1-channel amplifier configuration, delivering a powerful output that ensures dynamic and immersive audio experience. Both models boast Pioneer's sophisticated Class D3 amplification technology, which efficiently provides high power output while minimizing distortion and heat. This feature allows listeners to enjoy their favorite music and movies with clarity and depth.

One standout feature of these receivers is the Advanced MCACC (Multi-Channel Acoustic Calibration System) technology. This automatically adjusts the speaker settings to fit the unique acoustics of the room, ensuring balanced sound across all channels. The calibration process is user-friendly, allowing even novice users to achieve optimal sound performance.

In terms of connectivity, the VSX-84TXSi and VSX-82TXS are equipped with multiple HDMI inputs, supporting the latest audio and video formats, including 4K Ultra HD. They also support Dolby TrueHD and DTS-HD Master Audio, which deliver lossless audio quality for a truly cinematic experience at home.

The VSX-84TXSi and VSX-82TXS models feature a user-friendly interface that includes on-screen displays and intuitive controls. They also offer extensive compatibility with various formats, including MP3, WMA, and AAC. For those who want to stream their music, both models have built-in support for networking capabilities, allowing users to connect to their home network and stream content from devices seamlessly.

The VSX-82TXS, while slightly less powerful than the VSX-84TXSi, offers many features that appeal to casual users and audiophiles alike. It retains the same high-quality audio processing and supports a variety of surround sound formats, making it a versatile choice for different media types.

Overall, the Pioneer VSX-84TXSi, VSX-82TXS, VSX-84TXSi-S, and VSX-82TXS are excellent choices for anyone looking to enhance their home entertainment experience. With a blend of advanced technology, impressive audio performance, and user-friendly features, these receivers continue to be favored options for home theater setups.
Top Page Image Contents