HUAWEI MG323 GSM M2M Module
AT Command Interface Specification Commands for Configuration
Issue 02 (2010-11-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd. 22

2.11.3 Setting the Terminal Error Reporting Mode

Write
command
AT+CMEE=<n>
Function Sets the mode of reporting errors related to the ME by the module.
Response z In case of successful execution: <CR><LF>OK<CR><LF>
z In case of an error: <CR><LF>ERROR<CR><LF>
z In case of an error related to the MT: <CR><LF>+CME ERROR:
<err><CR><LF>
Note:
If the error cause is unrelated to the MT, common ERROR is returned.
2.12 AT+CSCS - Command for Setting the TE Character Set

2.12.1 Querying the Character Set Supported by the TE

Test
command
AT+CSCS=?
Function Queries the character set supported by the TE.
Response <CR><LF>+CSCS: (list of supported <chset>s) <CR><LF>
<CR><LF>OK<CR><LF>
Parameter description
<chset>: string, which indicates the character set of the MS.