HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Overall Description

1.3 Instructions for Use

You are not advised to use various parameter values that are not described in this document or not supported currently as described in this document.

The AT command parameters described in the following chapters are in two formats: <> and [], which are described as follows:

<...> The parameter inside these angle brackets is mandatory. The <> does not exist in a command.

[...]

The parameter inside these square brackets is optional. The [] does not exist

in a command or a response.

<CR>

Carriage return character. For details, see the description in S3.

<LF>

Line feed character. For details, see the description in S4.

When an AT command is sent, the characters contained in the name and parameters (excluding SMSs, phone book, and operator name) of the AT command are case insensitive. All the characters contained in the result returned by the AT command must be in upper case (excluding SMSs, phone book, and operator name).

When an AT command is sent, string parameters can be placed inside quotation marks or not. The strings in the result returned by the AT command are placed inside quotation marks.

1.4 Overview of AT Command Interfaces

1.4.1 Description of AT Commands

An AT command controls the rules for interaction between the TE such as PC and MT such as MS. Figure 1-1 shows the interaction between the TE and MT.

Figure 1-1Interaction between the TE and MT

Figure 1-2 shows the basic organization format of the AT command line.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

2

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 19
Image 19
Huawei MG323 Instructions for Use, Overview of AT Command Interfaces, Description of AT Commands, A command or a response