HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Data Services

9.3.2 Reading the GPRS Event Reporting Mode

Read

AT+CGEREP?

command

 

Function

Reads the GPRS event reporting mode.

Response

z In case of successful execution: <CR><LF>+CGEREP:

 

<mode>,<bfr><CR><LF>

 

<CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT: <CR><LF>+CME ERROR: <err><CR><LF>

9.3.3Setting the GPRS Event Reporting Mode

Write

AT+CGEREP=[<mode>[,<bfr>]]

command

 

Function

Sets the GPRS event reporting mode.

Response

z In case of successful execution: <CR><LF> OK<CR><LF>

 

z In case of an error during command execution:

 

<CR><LF>ERROR<CR><LF>

 

z In case of an error related to the MT: <CR><LF>+CME ERROR:

 

<err><CR><LF>

Unsolicited event reporting

URC 1

+CGEV: REJECT <PDP_type>, <PDP_addr>

The MT disables the reporting of +CRING to the TE. The request for activating the PDP context on the network is automatically rejected.

URC 2

+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]

The network requests for re-activating the PDP context. The <cid> parameter is used to re-activate the PDP context.

URC 3

+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]

The network requests for deactivating the PDP context. The <cid> parameter is used to activate the PDP context.

URC 4

+CGEV: MT DEACT <PDP_type>, <PDP_addr>, [<cid>]

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

115

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 132
Image 132
Huawei MG323 manual Reading the Gprs Event Reporting Mode, Setting the Gprs Event Reporting Mode, Urc