Querying the Current System Time, At+Cclk? | Huawei MG323 instruction

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification	Commands for Hardware Control

14.2.1Checking Whether the Command for Setting the System Time Exists

Test AT^CCLK=? command

Function Checks whether this command exists.

Response

z In case of successful execution: <CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR:<CR><LF>

zIn case of an error related to the MT: <CR><LF>+CME ERROR: <err><CR><LF>

14.2.2Querying the Current System Time

Read	AT+CCLK?
command
Function	Queries the current system time.
Response	z In case of successful execution:
	<CR><LF>+CCLK: <time><CR><LF>
	<CR><LF>OK<CR><LF>
	z In case of an error during command execution:
	<CR><LF>ERROR<CR><LF>
	z In case of an error related to the MT: <CR><LF>+CME ERROR:
	<err><CR><LF>

Parameter description

<time>: string, which indicates the current system time of the ME. The format is "yy/MM/dd,hh:mm:ss".

14.2.3 Setting the System Time

Write	AT+CCLK=<time>
command
Function	Sets the system time.
Response	z In case of successful execution: <CR><LF>OK<CR><LF>
	z In case of an error during command execution:
	<CR><LF>ERROR<CR><LF>
	z In case of an error related to the MT: <CR><LF>+CME ERROR:
	<err><CR><LF>

	Issue 02 (2010-11-23)	Huawei Proprietary and Confidential	194
		Copyright © Huawei Technologies Co., Ltd.

Image 211

Huawei MG323 manual Querying the Current System Time, Setting the System Time, Test ATCCLK=? command, At+Cclk?

Contents

AT Command Interface Specification No Warranty History About This DocumentVersion Date Chapter Descriptions Contents Commands for Status Control Commands for Security Control Commands for Call Control Commands for Network Services 110 135 156 160 182 204 Figures Tables 142 Overall Description Content DescriptionProduct Description Instructions for Use Overview of AT Command InterfacesDescription of AT Commands A command or a response Prefixed with + Types of AT Commands Command Format Description 1Format of a basic command Command Command Format Description Type 3Types and formats of extended and vendor-defined commands Rules for Running AT Commands Abort Attributes of AT Commands Chapter Describes Organization of This Document Chapter Describes AT&F Command for Restoring Factory Settings Commands for Configuration AT&D AT+CMERAT+CIND AT\Q AT&C Execution command AT&V Command for Querying the Current ConfigurationExamples of Results Returned by the &V Command Error errCRLF AT&W Command for Storing the Current ConfigurationAT Commands ATS7 AT+CR ATQ Command for Controlling the Return of Execution ResultsATS3 ATS4 ATS5 Ring ATV Command for Setting the Formats of ME ResponsesString Format Numeric Meaning Connect Busy ATZ Command for Restoring the Settings Saved by the UserATE Command for Setting Echo Error Fun Function Description Remarks AT+CFUN Command for Setting the Work ModeTest command Querying the Supported Work Modes URC 7Relations between work modes and servicesSetting Value Setvice Write Reading the Current Work ModeSetting the Work Mode Read AT+CFUN? command Examples Atsmso Command for System ShutdownSetting System Shutdown Execution Atsmso command AT+GCAP=? Execution AT+GCAP commandName string for example, +CGSM AT+GCAP +GCAP +CGSM Test AT+CMEE=? command 11 AT+CMEE Command for Setting Terminal Error ReportingQuerying the Error Reporting Mode Supported by the Terminal Reading the Terminal Error Reporting Mode Querying the Character Set Supported by the TE 12 AT+CSCS Command for Setting the TE CharacterSetting the Terminal Error Reporting Mode Test AT+CSCS=? command Value Setting the Character Set of the TEDefault value UCS2 Reading the Character Set of the TE Test ATSCFG=? command Atscfg Extended Command for Setting Configuration ItemsStr Value Value Description Read ATSCFG? command Sysstart Command for Unsolicitedly Reporting Module StartupReading the Settings for Configuration Items Setting Configuration Items URC Crlfshutdowncrlf Test AT+CMER=? command Commands for Status ControlAT+CMER Command for Setting Event Reporting Querying the Supported Settings for Event Reporting Reading the Current Settings for Event Reporting AT+CIND Command for Controlling Indication EventsSetting the Event Reporting Mode IndDescr IndValue Test AT+CIND=? command Read AT+CIND? command Setting Whether to Report Indication EventsReading the Current Indication Status AT+CIND=? Atsind Extended Command for Controlling Indication EventsQuerying the Supported Report Events Sysstart IndDescr IndValue Read Reading the Current Event Reporting Mode Crlfsind AT+WS46 Command for Selecting a Radio NetworkTest AT+WS46=? command Querying the Supported Radio Networks Reading the Current Radio Network +CIEV Command for Indicating the Status ChangeSetting the Radio Network to Be Registered Read AT+WS46? command AT\Q command sets the flow control mode Commands for Serial Port ControlAT\Q Command for Enabling Software or Hardware Flow Control AT&C Command for Setting the DCD Usage State AT&S Command for Setting the DSR Usage State AT&D Command for Setting the DTR Usage State Querying the Supported Baud Rates of the DTE-DCE AT+IPR Command for Setting the Baud RateTest AT+IPR=? command Read AT+IPR? command Test AT+CMUX=? command AT+CMUX Command for Setting MultiplexingSetting the Baud Rate of the DTE-DCE Querying the Supported Settings for Multiplexing Issue 02 Huawei Proprietary and Confidential Command Reading the Current Settings for MultiplexingSetting Multiplexing Case of an error CRLF+CME Error errCRLF Reading the Password Entry Request Commands for Security ControlAT+CPIN Command for PIN Management Checking Whether a PIN Management Command Exists Example Enter the PIN code for unlocking Responding to the Password Entry Request AT+CPIN? +CPIN SIM PIN AT+CLCK Command for Locking and Unlocking the DeviceChecking the Devices Supported by This Command AT+CLCK command locks and unlocks the device Locking and Unlocking the Device +CLCK AT+CPWD Command for Modifying the PasswordAT+CPWD command modifies the password AT+CLCK=SC,2 Test Modifying the PasswordAT+CPWD=? Card Example Run AT+CPWD to modify the PIN code+CLCK0 ATI Command for Querying the Product Information Commands for Identification ATI4 Huawei MG323 AT+CGMI/GMI Command for Querying the Vendor InformationATI +GCAP +CGSM Query the vendor information AT+CGMM/GMM Command for Querying the Product ModelAT+CGMM/GMM command queries the product model Querying the Vendor Information Request MG323 Querying the Product Model Number RequestExample Query the product model number AT+CGMM 11.810.01.00.00 OK AT+GMR Querying the Software Version NumberExample Query the software version number AT+CGMR Char AT+CGSN/GSN Command for Querying the ImeiChecking Whether the Command for Querying the Imei Exists Querying the Imei Querying the Imsi AT+CIMI Command for Querying the ImsiChecking Whether the Command for Querying the Imsi Exists Test AT+CIMI=? command AT+CIMI Example Query the Imsi46009755200774 ATD Command for Originating a Call Commands for Call ControlCase of failed link establishment Crlfno Carriercrlf ATD*98# Command for Requesting the Gprs IP Service ATD*99# Command for Requesting the Gprs ServiceCarriercrlf Execution ATHn command ATH Command for Hanging Up the ConnectionCrlfconnectcrlf Crlfno Carriercrlf ATA Command for Answering a Call or Data ServicesReading the Settings of the Automatic Answer Data Services Crlfokcrlf Reading the Set Waiting Duration Request Setting Unsolicitedly Answering Data Services Test AT+CRLP=? command Setting the Waiting DurationQuerying the Supported RLP Parameters AT+CBST Command for Setting the Bearer Service Type Test AT+CBST=? command Querying the Supported Bearer Service TypesQuerying the Current Bearer Service Type Setting the Bearer Service Type Execution ATOn command 10 +++ Command for Switching Data Mode to Command ModeATO Command for Switching Command Mode to Data Mode Execution +++ Command Checking Whether AT+CHUP Hang-up Is Supported 12 AT+CHUP Command for Hanging Up Data Services13 AT+CR Command for Setting the Service Reporting Mode 12.2 AT+CHUP Command for Hanging Up Connect Querying the Supported Settings for Service ReportingReading the Current Settings for Service Reporting Mode integer Default value disables service reporting AT+CRC=? 14 AT+CRC Command for Setting the Cell Result CodesSetting Service Reporting Querying the Supported Settings for the Cell Result Codes AT+VTS command sends the Dtmf tone 15 AT+VTS Command for Sending the Dtmf ToneQuerying the Current Settings for the Cell Result Codes Settings the Cell Result Codes AT+CLIP=? Querying the Settings Supported by the AT+CLIP CommandSending the Dtmf Tone Supported nsCRLF MCRLF Reading the Settings of the Clip ServiceSetting the Clip 16.4 +CLIP Command for Unsolicitedly Reporting the CLI Type character string. -3 lists the values 3type values Ring Command for Unsolicitedly Reporting Incoming CallsURC Crlfringcrlf AT+COPN command queries the operator name Commands for Network ServicesAT+COPN Command for Querying the Operator Name Checking Whether This Command Is Supported AT+COPN=? AT+COPS Command for Selecting OperatorsExecution AT+COPN command Reading the List of Operators Crlfokcrlf AT+COPS? Setting the Current Operator InformationExample Obtain the list of available operator information AT+COPS=? Case of an error during command execution AT+CREG Command for Querying Network RegistrationChecking the Parameter Range Supported by This Command AT+CREG command queries network registration Querying the Current Status of Network Registration Setting the Status of Network Registration AT+CREG? AT+CSQ Command for Querying the Signal QualityAT+CREG=2 CRLF+CSQ list of supported rssis,list of supported bersCRLF AT+CSQ=? Atsmonc Command for Querying the Cell InformationQuerying the Current Signal Quality Example Query the parameter range supported by the command Atsmonc Checking Whether This Command Is AvailableTest ATSMONC=? command Querying the Cell Information ATSMOND=? ATSMONC=?Example Query the current cell information Atsmonc Smonc RSSI,BER Execution Atsmond command Atsmond BER bit error rate 0-7ATMONI=? Parameter Description 1List of parameters for the serving cellParameter values set for the ME in different states NCC BCC PWR ME has accessed the cell and registered with the networkServing cell Dedicated Channel MCC MNC LAC Crlfcrlfokcrlf Execution Atmoni command Atmoni ATMONI=?ATMONI=1 PWR Atmonp Command for Monitoring Idle Neighbor CellsDBm Q ChMod Execution CRLF+CME Error errCRLF Case of an error related to the MT during commandATMONP=? Obtaining the Monitoring Information About Neighbor Cells Execution Atmonp command Monp ATMONP=? Chann rs DBm MCC MNC BCC 712 460 001 735 705 Example Query the information about neighbor cellsAtmonp ATMONP=1 712 20 -73 460 Atsmong Command for Gprs MonitoringBcch RAC PbcchPAT NOM Crlfbcch G Pbcch PAT MCC MNC NOM TA Execution Atsmong command ATSMONG=? Example Obtain the parameter rangeSmong 1,1-100 Bcch Pbcch PAT MCC MNC NOM RAC AtsmongBcch Pbcch PAT MCC MNC NOM TA RAC ATSMONG=1,1 Atsplm command reads the Plmn list Atsplm Command for Reading the Plmn List552 460 255 Atsplm Execution Atsplm commandQuerying the List of Operator Names Saved on the ME Example Query the list of operators saved on the ME Default value operator information oper in numeric format AT+CPOL command sets the list of preferred operators Example Add a preferred operator AT+CPOL=1,2,46000 Setting the List of Preferred OperatorsQuerying the List of Preferred Operators Operator indicates an operator name in numeric format Indexa sequence number range supported by the SIM card Atsplr Command for Querying Preferred OperatorsAtsplr command queries preferred operators Querying the Current Range of Preferred Operators ATSPLR=1,2 Atsplw Command for Writing Preferred Operators Writing the Information About Preferred Operators 14 AT+CNUM Command for Querying Subscriber Numbers Querying the Msisdn Related to Subscribers Execution AT+CNUM commandCRLF+CNUM AT+CPBS=ON AT+CPBW=1 AT+CNUM AT+CPBS=ONAT+CPBW=1,13903702769,145 Query the Msisdn AT+CNUM Querying the Supported Status of PDP Context Commands for Data ServicesAT+CGACT=? AT+CGACT? Setting the Activation State of the PDP ContextCase of an error related to the MT CRLF+CME Reading the Activation State of the PDP Context AT+CGACT? Checking the Supported Gprs Service StateAT+CGACT? +CGACT 1,0 AT+CGACT=1,1 AT+CGATT=0 Querying the Current Gprs Service StateSetting the Gprs Service State AT+CGATT? Checking the Supported Gprs Event Reporting Mode AT+CGEREP Command for Reporting Gprs EventsAT+CGEREP=? Setting the Gprs Event Reporting Mode Reading the Gprs Event Reporting ModeURC URC +CGEV MT Detach AT+CGDATA Command for Entering the Data ModeURC +CGEV NW Detach Network requests for Gprs detachment AT+CGDATA=? Case of failed command executionEstablishing Communication Between the TE and Network Case of failed communication establishment Crlfno +CGDCONT1,IP,1234,0.0.0.0,0,0 Establish the communication AT+CGDCONT Command for Defining the PDP ContextRun +++ to quit the data mode and enter the command mode AT+CGDCONT? AT+CGDCONT=? Querying the Range of PDP Related Parameters CRLF+CGDCONT …CRLFCRLF Crlfokcrlf Setting the Status of the PDP ContextReading the Status of the PDP Context +CGDCONT1,IP,1234,,0,0 AT+CGPADDR=? AT+CGPADDR Command for Reading the PDP AddressQuerying the Supported PDP Index Value Reading the PDP Address List of the Specified PDP Context Read the PDP address. AT+CGPADDR=1 +CGPADDR1,192.168.50.64 AT+CGQMIN=? Delay Level Average Percentile Transmission DelayWhen the size of SDU is 1024 octets Querying the Supported QoS Parameter Range Issue 02 Huawei Proprietary and Confidential 124 CRLF+CGQMIN Querying the Minimum QoS of All PDP Contexts AT+CGQREQ=? AT+CGQREQ Command for Setting the Requested QoS ProfileSetting the Minimum QoS of a PDP Context Checking the Parameter Range Supported by the Command Delay Level Average Transmission Delay Percentile Issue 02 Huawei Proprietary and Confidential 128 CRLF+CGQREQ Setting the QoS of a PDP ContextQuerying All QoS Levels Specified by the TE Write comm Functi on Respo nse AT+CGREG=? 4 +CGREG Command for Reporting Unsolicitedly Reading the Current SMS Bearer Domain 10 AT+CGSMS Command for Selecting the MO SMS Bearer DomainAT+CGSMS command sets the MT SMS bearer domain Querying the Supported SMS Bearer Domains Setting the SMS Bearer Domain Issue 02 Huawei Proprietary and Confidential 134 Atsics command can create and edit a connection profile Commands for Internet ServicesAtsics Command for Creating a Connection Profile Checking Whether the Sics Command Is Available CSD Not Supported Reading the Information About Connection ProfilesCurrently Setting the Internet Connection Profile ATSICS? Atsici Command for Querying the Connection ProfileAtsici command queries the status of the connection profile Query the status of the connection profile ATSICI? Querying the ID of the Defined Connection ProfileQuerying the Status of the Connection Profile ATSICI=? ATSICI? Displaying the Status of the Specified Connection ProfileExample Query the ID of the supported connection profile ATSICI=? Test ATSISS=? command Atsiss Command for Creating the Service ProfileReading the Status of the Service Profile Atsiss command sets the service profile SrvParmTag SrvParmValue SrvParmTag Mandatory/Optional Setting the Internet Service Profile Atsisi command queries the status of the service profile Atsisi Command for Querying the Service ProfileQuerying the ID of the Defined Service Profile Query the status of the service profile Crlfsisi Querying the Status of the Service Profile ATSISI=? Displaying the Status of the Specified Service ProfileATSISI? ATSISO? Atsiso Command for Starting Internet ServicesQuerying the Open Status of All Services This command starts a specified Internet service Example Enable service Starting a Specified Internet ServiceATSISO=0 Stopping a Specified Internet Service Atsisc Command for Stopping Internet ServicesATSISO? ATSISC=0 Atsisw Command for Writing Data for Internet ServicesWriting Data to the Buffer of a Service Test ATSISW=? command Example Check whether the command is available Sisw Command for Reporting UnsolicitedlyATSISW=? User enters 20 characters here Atsisr Command for Internet Services to Read DataChecking Whether the Atsisr Command Is Available Atsisr command reads data out from the service buffer Crlfsisr Reading Data Out From the Buffer of an Internet Service Exmaples Sisr Command for Reporting Unsolicitedly URC Crlfsis srvProfileId,urcCause, urcInfoId,urcInfoTextCRLF 11.1 AT+CMGD Command for Deleting Short Messages Commands for Short MessagesAT+CMGD=? AT+CMGD=1 Case of an error related to the MS CRLF+CMSDeleting Short Messages Example AT+CMGD=? +CMGD1-255 Check the parameter range AT+CMGF=? Checking the Supported Format of Short MessagesDelete all the short messages that are Stored on the SIM card AT+CMGF? Setting the Format of Short MessagesReading the Format of Short Messages AT+CMGF=0 Checking the Supported Status of Short Messages AT+CMGF=0, that is, when short messages are in PDU mode SCA Reading the List of Short MessagesOct Oct to 1Oct 12 Oct AT+CMGR=? 11.4 AT+CMGR Command for Reading Short Messages+CMGL 1,1 …Short messages in PDU mode AT+CMGL=4 Reading Short Messages When short messages are in PDU mode +CMGR=0CRLF+CMS Error errCRLF Index of the SIM card CRLF+CME Error Write command 11.5 AT+CMGS Command for Sending Short MessagesTest AT+CMGS=? command This command sends short messages in PDU mode +CMGF=0 AT+CGSMS=1 AT+CMGF=0 11.6 AT+CMGW Command for Storing Short MessagesAT+CMGS=20 AT+CMGF=0 AT+CMGW=56 This command stores short messages in PDU mode +CMGF=0Example Store a short message in PDU mode Storing Short Messages Short message is successfully sent Test AT+CMSS=? commandWhen the short message is in PDU mode +CMGF=0 Sending a Short Message at the Specified Location AT+CNMI=? Example Send a stored short message in PDU modeAT+CMGF=0 AT+CMSS=8 Location whose index is +CMSS Issue 02 Huawei Proprietary and Confidential 169 CRLF+CNMI Setting the Status of Short Message NotificationReading the Status of Short Message Notification AT+CNMI=1,1,0,0,0 Checking the Storage Location of Short Messages AT+CPMS command sets the storage location of short messagesAT+CPMS=? AT+CPMS? Reading the Status of Storage LocationCRLF+CPMS AT+CPMS? 11.10 AT+CSCA Command for Setting the NumberSetting the Storage Location AT+CPMS=? Response z When the Smsc has been registered Checking Whether the Command Is AvailableReading the Currently Registered Number of the Smsc Number falls within the number range of the home country Setting the Number of the SmscManagement or service. The subscriber cannot use this value Number is organized by the network AT+CSCA? AT+CSCB command selects the type of cell messages+CSCA 1380063859 AT+CSCB? Setting the Current CBM TypeReading the Current CBM Type Example Query the current CBM information +CSCB 0,1 11.12 AT+CSMS Command for Setting the Message Service TypeAT+CSMS command sets the message service type AT+CSCB=? AT+CSMS? Reading the Current Message Service TypeSetting the Message Service Type Example AT+CSMS=? +CSMS +CMT command is used to indicate that a new SM is received 11.13 +CMTI Command for Unsolicitedly Reporting SMS Arrival11.14 +CMT Command for Unsolicitedly Reporting a New SM +CMTI command is used to indicate that a new SM is received 11.15 +CBM Command for Unsolicitedly Reporting a Cell SM Checking Whether the +CRSM Command Is Available Commands for the SIM CardAT+CRSM=? CRLF+CRSM Accessing the SIM Database AT+CPBR command reads the phone book Commands for the Phone Book13.1 AT+CPBR Command for Reading the Phone Book Checking the Parameter Range Supported by the +CPBR Command AT+CPBR=? 13.1.2 +CPBR Command for Reading the Phone BookCRLF+CPBR 13.2 AT+CPBW Command for Writing the Phone Book Writing a Record into the Phone Book Example Query the parameter range supported by this commandAT+ CPBW=? Checking the Value Range Supported by the +CPBS Command 13.3 AT+CPBS Command for Selecting the Phone Book MemoryAT+CPBS=? +CPBS FD,SM,ON,LD,MC,RC,EN Example Setting the Memory Type of the Phone BookReading the Current Memory of the Phone Book AT+CPBS=? +CPBS SM,23,250 Example AT+CPBS?AT+CPBS=SM 14.1 AT+CALA Commands for Hardware ControlCase of an error related to the MT CRLF+CME Error Integer, which indicates the index of the alarm clock array Setting an Alarm Clock Querying the Set Alarm ClockAT+CALA? AT+CALA=? 14.2 AT+CCLK Command for Setting the System Time14.1.4 +CALA Command for Reporting Unsolicitedly +CALA 0,0,1-16 Example Query the current alarm clock AT+CCLK? Setting the System TimeTest ATCCLK=? command Querying the Current System Time AT+CCLK? Example Query the current system time Atswspath command switches the audio channel Commands for Audio ControlAtswspath Command for Switching Between Audio Channels This chapter describes the AT commands for audio control Querying the Supported Microphnoe Gain Levels Switching the Audio ChannelAT+CMIC command adjusts the the mircophone gain level Reading the Current Audio Channel Querying the Current Microphone Gain Level Atecho Command for Suppressing the EchoSetting the Microphone Gain Level Atecho command suppresses the echo ATECHO? Case of an errorCRLFERRORCRLFQuerying the Supported Echo Suppressing Functions ATECHO=? AT+CLVL command adjusts the speaker volume 15.4 AT+CLVL Command for Adjusting the Speaker VolumeSetting the Echo Suppressing Function Querying the Supported Speaker Volume Level AT+CMUT command is used to mute and unmute the microphone 15.5 AT+CMUT Command for Muting and Unmuting the MicrophoneReading the Current Speaker Volume Setting the Speaker Volume AT+CMUT? Querying the Supported Muting Settings for the MicrophoneReading the Curent Muting Settings of the Microphone Test AT+CMUT=? command Setting the Muting Function of the Microphone Execution command Function Other Commands16.1 A/ Command for Executing the Previous Command Again Execution Command Setting the Command Line Ending Character Querying the Current Command Line Ending CharacterATS3? CRLFnCRLFCRLFOKCRLF 16.3 ATS4 Command for Setting the Response Format Character013 Example Set the command line ending character ATS3=13 Querying the Current Format Character ATS4? 16.4 ATS5 Command for Setting the Backspace CharacterSetting the Response Format Character Example Query the current response format character Querying the Current Backspace Character Setting the Current Backspace CharacterATS5? Crlftherm modeCRLF ATS5=8 1List of effects on AT commands imposed by SIM PIN List of effects on AT commands imposed by SIM PINAppendix Commands for identification Commands for status controlCommands for serial port control Commands for security control ATO AT+CHUP AT+CR AT+CRC AT+VTS AT+CLIP Commands for network servicesCommands for data services ATS7 AT+CRLP AT+CBST Commands for the phone book Commands for Internet servicesCommands for short messages Command related to the SIM card Other commands List of URC CommandsCommands related to the hardware Commands for audio control AT+CGEREP +CGEV NW Detach +CGEV ME Detach AT+CALA Sysstart Alarm ModeSIS AT+CGEREP 3Common CME Error codes List of CME/CMS Error CodesErr Code Text AT+CMEE=2 4CME Error codes related to the Gprs No +CNMA ACK Expected 5CMS Error codes related to the SMS6CME Error codes related to the MG323 only Err Code Text AT+CMEE=2 Not Supported CurrentlyPage 7Acronyms and abbreviations Acronyms and AbbreviationsAcronym and Abbreviation Full Spelling Plmn PDPPDU PIN XER XCDWcdma