HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Network Services

8.12AT^SPLR - Command for Querying Preferred Operators

The AT^SPLR command queries preferred operators.

8.12.1Checking the Parameter Range Supported by This Command

Test AT^SPLR=? command

Function Returns the parameter range supported by this command.

Response z In case of successful execution:

<CR><LF>^SPLR: (list of supported <indexa>s)<CR><LF> <CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT during command execution: <CR><LF>+CME ERROR: <err><CR><LF>

Parameter description

<indexa>: sequence number range supported by the SIM card.

8.12.2 Querying the Current Range of Preferred Operators

Write AT^SPLR=<index1>[,[index2]] command

Function Queries the current status of network registration.

Response z In case of successful execution:

<CR><LF>^SPLR:<index1><oper><CR><LF><CR><LF>^SPLR:<inde

x2><oper><CR><LF><CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT during command execution: <CR><LF>+CME ERROR: <err><CR><LF>

Note:

The system returns a single record or multiple consecutive records of the list of preferred operators on the SIM card that are read according to the index. If index1 and index2 are entered, all records from index1 to index2 (index1 and index2 included) are returned. If index2 is not entered, the single record index1 is returned.

Parameter description

<index1>: start sequence number in the list of preferred operators.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

105

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 122
Image 122
Huawei MG323 manual Atsplr Command for Querying Preferred Operators, Querying the Current Range of Preferred Operators