HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Network Services

8.11AT+CPOL - Command for Setting the List of Preferred Operators

The AT+CPOL command sets the list of preferred operators.

8.11.1Checking the Parameter Range Supported by This Command

Test AT+CPOL=? command

Function Returns the parameter range supported by this command.

Response z In case of successful execution:

<CR><LF>+CPOL: (list of supported <index>s),(list of supported <format>s)<CR><LF>

<CR><LF>OK<CR><LF>

zIn case of an error during command execution: <CR><LF>ERROR<CR><LF>

zIn case of an error related to the MT during command execution: <CR><LF>+CME ERROR: <err><CR><LF>

Parameter description

<index>: sequence number of an operator from the list of preferred operators on the SIM card.

<format>: integer, which indicates the format of operator name.

z0: operator information <oper> in long string format, which consists of not more than 16 characters.

z1: operator information in short string format. Currently, the operator information in short string format and in long string format has the same meaning.

z2 (default value): operator information <oper> in numeric format.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

103

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 120
Image 120
Huawei MG323 manual AT+CPOL command sets the list of preferred operators