Huawei MG323 manual Commands for Status Control

HUAWEI MG323 GSM M2M Module
AT Command Interface Specification		Contents
2.11.1 Querying the Error Reporting Mode Supported by the Terminal		21
2.11.2 Reading the Terminal Error Reporting Mode		21
2.11.3 Setting the Terminal Error Reporting Mode		22
2.12 AT+CSCS - Command for Setting the TE Character Set		22
2.12.1 Querying the Character Set Supported by the TE		22
2.12.2 Reading the Character Set of the TE		23
2.12.3 Setting the Character Set of the TE		23
2.13 AT^SCFG - Extended Command for Setting Configuration Items		24
2.13.1 Querying the Configuration Items That Can Be Set by the Module		24
2.13.2 Reading the Settings for Configuration Items		26
2.13.3 Setting Configuration Items		26
2.14 ^SYSSTART – Command for Unsolicitedly Reporting Module Startup		26
2.15 ^SHUTDOWN – Command for Unsolicitedly Reporting Module Power-off		27
3 Commands for Status Control		28
3.1 AT+CMER - Command for Setting Event Reporting		28
3.1.1 Querying the Supported Settings for Event Reporting		28
3.1.2 Reading the Current Settings for Event Reporting		29
3.1.3 Setting the Event Reporting Mode		29
3.2 AT+CIND - Command for Controlling Indication Events		29
3.2.1 Querying the Supported Indication Events and Indication Status		30
3.2.2 Reading the Current Indication Status		31
3.2.3 Setting Whether to Report Indication Events		31
3.2.4 Examples	...............................................................................................................................	32
3.3 AT^SIND - Extended Command for Controlling Indication Events		32
3.3.1 Querying the Supported Report Events		32
3.3.2 Reading the Current Event Reporting Mode		34
3.3.3 Setting the Event Reporting Mode		35
3.4 AT+WS46 - Command for Selecting a Radio Network		35
3.4.1 Querying the Supported Radio Networks		35
3.4.2 Reading the Current Radio Network		36
3.4.3 Setting the Radio Network to Be Registered		36
3.5 +CIEV – Command for Indicating the Status Change		36
4 Commands for Serial Port Control		37
4.1 AT\Q - Command for Enabling Software or Hardware Flow Control		37
4.2 AT&C - Command for Setting the DCD Usage State		37
4.3 AT&D - Command for Setting the DTR Usage State		38
4.4 AT&S – Command for Setting the DSR Usage State		38
4.5 AT+IPR - Command for Setting the Baud Rate of the DTE-DCE		39
4.5.1 Querying the Supported Baud Rates of the DTE-DCE		39
4.5.2 Reading the Current Baud Rate of the DTE-DCE		39
4.5.3 Setting the Baud Rate of the DTE-DCE		40
	Huawei Proprietary and Confidential
Issue 02 (2010-11-23)		ii
	Copyright © Huawei Technologies Co., Ltd.