HUAWEI MG323 GSM M2M Module

 

AT Command Interface Specification

Commands for Short Messages

11.11.2 Reading the Current CBM Type

Read

AT+CSCB?

command

 

Function

Reads the current CBM type.

Response

z In case of successful execution:

 

<CR><LF>+CSCB: <mode>,<mids>,<dcss><CR><LF>

 

<CR><LF>OK<CR><LF>

 

z In case of an error during command execution:

 

<CR><LF>ERROR<CR><LF>

 

z In case of an error related to the MT: <CR><LF>+CME ERROR:

 

<err><CR><LF>

Parameter description

<mids>: string, which indicates the combination of all CBM identification codes. This parameter is stored in SIM card. For example, "0,1,5,320-478,922". A maximum of fifteen values are supported

<dcss>: string, which indicates the combination of all CBM data coding schemes. The default value is 0-255. For example, "0-3,5". A maximum of five values are supported Setting the Current CBM Type

11.11.3 Setting the Current CBM Type

Write

AT++CSCB=[<mode>[,<mids>[,<dcss>]]]

command

 

Function

Sets the current CBM type.

Response

z In case of successful execution: <CR><LF>OK<CR><LF>

 

z In case of an error during command execution:

 

<CR><LF>ERROR<CR><LF>

 

z In case of an error related to the MT: <CR><LF>+CME ERROR:

 

<err><CR><LF>

Note:

zIf no parameters of this command are set, AT+CSCB= considers the previously set values valid for various parameters.

zThe settings specified by mids and dcss are added to or removed from the previous settings.

zat+cscb=0 deletes all mids and dcss settings that have been configured.

zat+cscb=1 keeps mids unchanged and sets dcss to the default value.

11.11.4Examples

Example:

Query the current CBM information.

Issue 02 (2010-11-23)

Huawei Proprietary and Confidential

177

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 194
Image 194
Huawei MG323 manual Reading the Current CBM Type, Setting the Current CBM Type, Example Query the current CBM information