Using the Service and Assembly Module (SAM)

Setting the Scan Area

To set the Scan Area, enter values for:

# Pixels (valid values range from 1 through 6002); for fastest scanning, enter a value of 1000

Pixel Offset (valid values range from 0 through 6001)

# Lines (valid values range from 1 through 7464)

Line Offset (valid values range from 0 through 7463)

Pixel Summing (valid values are 1:1, 1:2, and 1:4)

NOTE: If you select Pixel Summing of 1:2 or 1:4, use the Actual #Pixels and Actual #Lines for viewing the image in the Adobe Photoshop program.

Scanning the Image Data

1.If desired, save the scanned image as a file:

a.Enter the Path information (file destination).

b.Select Write image to file.

2.Click Scan.

August 2001

A-9

Page 59
Image 59
Kodak HR 500 manual Setting the Scan Area, Scanning the Image Data