Maintaining the Equipment

Cleaning the Lens

IMPORTANT: Wear white cotton gloves for this procedure to prevent oils and dirt from being absorbed into the microfiber cleaning cloth.

1.Use the software installed on your host computer to set the magnification to 2.00, which positions the lens as near to the front of the scanner as possible.

2.Clean the front of the lens with the supplied camel’s-hair brush.

3.Check that the lens is clean; if not, clean with a dry, untreated microfiber cleaning cloth.

f-5.6

4. Check that the lens is set to f-stop setting f-5.6.

4-2

August 2001

Page 42
Image 42
Kodak HR 500 manual Cleaning the Lens