Using the Long Roll Accessory
D-24 August 2001
Appendix D-1: Calibrating the Sensor Offsets

IMPORTANT: Do this procedure only if you will be using SAM to operate th e

scanner.

Do this procedure twice, once for the left sensor and once for the right sens or . For
best visibility, use the largest film format you have.
NOTE: It is not necessary to prepare and load the film twice.

Preparing and Loading the Film

1. Create a roll of film with the center of several frames clearl y marked.
2. Edit the roll of film, making sure to center the mark i n the crop box on the
editor.
3. Load the edited film, beginning at the left side of the sc anner (see Loading
and Threading Film on page D-16).
center