Kodak HR 500 manual Appendix D-2 Determining and Setting the Trigger Points

Using the Long Roll Accessory

Appendix D-2: Determining and Setting the Trigger Points

IMPORTANT: Do this procedure only if you will be scanning film that has a significantly higher or lower D-min from negative film, such as black-and-white film or color positive film.

1.With the PC powered off, power on the scanner.

2.Wait for the series of 3 beeps to sound at the scanner (or for the lamp to illuminate).

3.Power on the PC.

Recording the Highest Numbers on the LEDs

IMPORTANT: There must not be film in the scanner.

1.Open the plastic cover.

2.Look at the red LED number on the right side of the Long Roll Accessory. Note this number as being the “highest” number on the right side.

TEACH	ADJ	MODE
SET	RUN L	D

plastic cover

P192_1566BCA

P192_1566BC

3.Look at the red LED number on the left side. Note this number as being the “highest” number on the left side.

D-34 August 2001