August 2001 2-1
2 Connecting and Operating the Scanner
This chapter gives instructions for:
•preparing the host computer
•connecting the Kodak Professional HR 500 F ilm Scanner to the host
computer
•starting up the scanner system
•preparing to scan an image
•performing a scan
•shutting down the scanner
Preparing the Host Computer
CAUTION: Do not connect power to the scanner.
1. Install the Ultra-Wide SCSI board into the host comput er.
IMPORTANT: Check the README file for your operating system before you
install the software.
2. Install the SAM software. See Installing the Service an d Assembly Module
(SAM) Software on page A-2.