Connecting and Operating the Scanner
2-10 August 2001
Inserting a Negative or Mounted Slide in the ScannerSelect the appropriate film holder for the negative or mou nted slide you will be
scanning.
Preparing a Carded Negative
IMPORTANT: For best focus, use the film holder that is closest to the siz e of the
opening in the aperture card.
1. Lift the film holder’s magnetic sheet.
2. With the emulsion side toward the rear of the scanner, locate the carded
negative on the film holder’s two pins.
3. Carefully close the magnetic sheet over the carded neg ative.
Continue with Placing the Film Holder in the Scanner on page 2-12.
P192_0021AC
carded
negative
film holder
magnetic
sheet pin
emulsion
side