Kodak HR 500 manual Changing the AC Input Voltage Setting and the Fuses

Connecting and Operating the Scanner

Changing the AC Input Voltage Setting and the Fuses

If needed, change the AC input voltage setting (voltage selector switch) and both fuses from 115 V AC to 220 V AC operation:

1. Make sure the power cord is removed from the scanner.

locking tab

115V

voltage selector switch

2.Insert a straight-blade screwdriver into the locking tab to open the AC input module.

3.Using your fingers (or, if needed, needle-nose pliers), remove the voltage selector switch.

4.Orient the voltage selector switch with 220 V AC facing you and insert it into the AC input module.

August 2001 2-3