August 2001 v
Regulatory Information
This equipment has been tested and found to comply with the limits for a C lass A
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates , uses, and can
radiate radio frequency energy and, if not installed and u sed in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference; in
which case, the user would be required to incur the expens e of correcting the
interference.

Cautionary Symbols

Hot Surface Symbol
CAUTION: Risk of burn. Wait at least 5 minutes for surface to cool.
Fuse Label
CAUTION: The Kodak Professional HR 500 Film Scanner uses double pole/
neutral fusing.

!

CAUTION: Double pole / neutral fusing.
ATTENTION: Double pôle / fusible sur le neutre.
ACHTUNG: Zweipolige bzw. Neutralleiter - Sicherung!
(2)100-120 V 50/60 Hz 6.3 A / 250 V / F
(2)200-240 V 50/60 Hz 3.15 A / 250 V / T