August 2001 3-1
3 Validating the Scanner
This chapter includes instructions for using the Servic e and Assembly Module
(SAM) and Adobe Photoshop software to validate that the scanner functions
properly.
NOTES: For more information about u sing the Service and Assembly module
software on the host computer, see Appendix A.
Before scanning for the first time, set up a folder (on your host
computer) for your work. Especially if you have more than one s canner,
include the scanner serial number (on the dataplate on the back of the
scanner) in the folder name.
IMPORTANT: The empty 70MM-CAL film holder must be in position in the scanner
before you start SAM. See Placing the Empty Film Hol der in the Film
Holder Guide on page 2-6.
Starting the SAM Software
1. Open SAM. The Operations window appears with the Mag /Focus tab
displayed.