Using the Long Roll Accessory

Attaching the Long Roll Accessory to the Scanner

CAUTION: Make sure the scanner is powered OFF.

1.Grasp the large rectangular opening to lift and remove the Long Roll Accessory from the shipping box.

tension arm toward rear of scanner

rectangular opening

pressure roller housing toward you

tension arm toward rear of scanner

P192_1545BC

ends

 

pressure roller housing toward you

2.Hold the Long Roll Accessory at the ends and carry it to the scanner.

3.Position the Long Roll Accessory so the two pressure roller housings are toward you and the two tension arms are toward the rear of the scanner.

D-8

August 2001

Page 74
Image 74
Kodak HR 500 manual Attaching the Long Roll Accessory to the Scanner