Kodak HR 500 manual Appendix D Using the Long Roll Accessory

Appendix D: Using the Long Roll Accessory

The Kodak Professional HR 500 Film Scanner Long Roll Accessory lets you scan rolls of 35 mm-, 46 mm-, 70 mm-, and 120/220-size edited film.

For the highest quality scans:

•before scanning, to reduce the chance of artifacts, clean the film with Super Film Cleaner (see Appendix B: Ordering Accessories and Supplies) or an equivalent cleaner that has ionized air and particle transfer rollers (PTR)

•install and use the appropriate static elimination kit (see Appendix B: Ordering Accessories and Supplies)

•follow daily maintenance procedures to clean the rollers and the punch readers on the Long Roll Accessory

•calibrate the scanner for each new roll of film

CAUTION: Kodak recommends that you use one-inch film cores with the Long Roll Accessory. However, your lab may require that you use 3/4-inch film cores. It is critical that the fast forward and rewind speeds are correct for the size core you use. The fast forward and rewind speeds should never be greater than 10 inches per second.

If you use	One-inch film cores	3/4-inch film cores
	Maximum speed is 10	Maximum speed is 8
	inches per second.	inches per second.
DP2 software	Consult your DP2 (Kodak Professional Digital Print
	Production Software) documentation.
SAM software	See the instructions on page D-31.

IMPORTANT: Before beginning the following installation procedure, check that the shipping box contains all items on the packing list. If it does not, contact your Kodak representative.

D-1