Using the Long Roll Accessory

Upgrading the Scanner’s Firmware

NOTE: Check the Web site (see page D-2)for the most up-to-date instructions. 1. Open SAM and click the Transfer tab on the Operations window.

2.Make sure the File Type is Firmware (W).

3.Click Browse (in the Service Files area) and find the .zip file that you downloaded from KODAK.COM (example: HR500\Px01_700.zip).

4.Click Open.

5.Make sure the Scanner Directory is set to Current.

6.Click To Scanner to start the transfer.

The transfer takes approximately one minute.

August 2001

D-3

Page 69
Image 69
Kodak HR 500 manual Upgrading the Scanner’s Firmware