Using the Long Roll Accessory

Programming the Sensors for the Long Roll Accessory

Power on the scanner.

NOTE: The display on the left sensor will be inverted.

Programming the Left Sensor

1.Open the plastic cover on the left display.

2.Make sure the operation mode selector is set to L.

NOTE: L means that light triggers high numbers. D means that dark triggers high numbers.

TEACH

ADJ

MODE

SET

RUN L

D

plastic cover

operation mode selector

P192_1555BCA

P192_1555BC

3.Move SET/ADJ/RUN to SET.

4.Press and hold MODE until d123 appears (123 is inverted).

TEACH

ADJ

MODE

SET

RUN L

D

August 2001

D-43

Page 109
Image 109
Kodak HR 500 manual Programming the Sensors for the Long Roll Accessory, Programming the Left Sensor