Introduction and Overview
Before You Begin
It is important that you know when to calibrate and when to focus the scanner. The table below is a guideline for calibrating and focusing. Focusing can occur as infrequently as when a different film format is scanned or as frequently as every scan.
Action or Condition | Need to | Need to | |
Calibrate? | Focus? | ||
| |||
|
|
| |
Changing the magnification | Yes | Yes | |
|
|
| |
Replacing the lamp | Yes | No | |
|
|
| |
Changing the balance filter position from negative | Yes | Yes | |
to positive or from positive to negative |
|
| |
|
|
| |
The scanner has not been calibrated at least twice | Yes | No | |
during the first half of a production shift |
|
| |
|
|
| |
Cleaning the light bar | Yes | No | |
|
|
| |
Replacing the balance filters or the IR filter | Yes | No | |
|
|
| |
Changing the film holder without changing the | Yes | Operator | |
magnification |
| Preference | |
|
|
| |
Scanning slides | No | Operator | |
|
| Preference | |
|
|
| |
Changing from scanning a long roll to scanning a | Yes | Yes | |
cut negative |
|
| |
|
|
|
You can manipulate scanned images using a program such as the Kodak
Professional Digital Print Production Software (DP2) or the Kodak Professional
HR 500 TWAIN Data Source before sending the images to your digital printer.
August 2001 |
