Kodak HR 500 manual Mm double

Validating the Scanner

3.Use the table below only as a starting point for determining Scan Area values.

NOTE: Keep the Line Offset (y): at the default value of 0 and keep Pixel Summing at the default value of 1:1.

IMPORTANT: The Pixel Offset must be greater than or equal to the first calibrated pixel and # Pixels must be less than or equal to the last calibrated pixel minus the first calibrated pixel.

Cut-Gate Film	Magnification	# Pixels	Pixel Offset	# Lines	File Size
Holders					(MB)
35 mm double-	.50	1033	2484	1460	4.3
perforated
	1.03	2129	1936	3008	18.3
	2.00	4133	934	5840	69.1
46 mm	.50	1754	2123	2554	12.8
	.60	2105	1948	3065	18.5
	1.58	5542	229	8071	128.0
6 x 4.5 cm	.50	2368	1816	1539	10.4
vertical
	.66	3126	1437	2031	18.2
	1.26	5967	17	3878	66.2
6 x 4.5 cm	.50	1539	2231	2368	10.4
horizontal
	.66	2031	1985	3126	18.2
	1.26	3878	1061	5967	66.2
6 x 6 cm	.50	2368	1816	2250	15.2
	.55	2605	1698	2475	18.5
	1.26	5967	17	5670	96.8
6 x 7 cm	.50	2368	1816	2775	18.8
	1.26	5967	17	6994	119.4
6 x 9 cm	.50	2368	1816	3325	22.5
	1.19	5636	182	7914	127.6
Split 70 mm	.50	2483	1759	1632	11.6
	.63	3129	1436	2056	18.4
	1.20	5960	20	3917	66.8
70 mm	.50	2682	1659	3450	26.5
	1.09	5846	77	7522	125.8
max mag	2.00	6000	0	7333	125.9
min mag	.50	2917	1542	3750	31.3

3-6 August 2001