Introduction and Overview
August 2001 1-5
Recommended Configuration of the Host Computer
The scanner is designed to communicate with Windows NT and Win dows 2000
platforms with the following configuration.
IMPORTANT: To ensure proper operation of the scanner, use the Ultra-Wide
SCSI board provided with the scanner.
Built-in SCSI interfaces in some computers may interfere with t he
provided Ultra-Wide SCSI board.

Minimum Host Computer Hardware Requirements

•Dual Pentium III/600 MHz
•512 MB memory
•10 GB available disk space
•Dedicated SCSI host adapter (provided with scanner)
NOTES: The hardware configuration is a minimum; for higher performance, a
high speed and larger memory capacity machine is requi red.
The SCSI board must be dedicated to running only the HR 500 Fil m
Scanner.
A SCSI cable connects the host computer to the scanner. This interface enables
the transfer of digital image data from the scanner to the host computer.

Minimum Software Requirements

•Windows NT 4.0, Service Pack 6 for using the scanner and software
•Adobe Photoshop 5.5 or higher for validating operation of the s canner