Using the Long Roll Accessory
D-28 August 2001
Locating the First Punched Frame
1. On the Film Controls dialog box, click Load First Frm. A dialog b ox appears.
2. Select the Film Processing Direction:
•If you are calibrating the left sensor offset, select Forward (Left to Right).
•If you are calibrating the right sensor offset, select Reverse (Ri ght to
Left).
3. Type -1 in the First Punch Number field.
-1 tells the scanner software to find the first punch (in the specifi ed direction).
4. Click Go.
The status bar shows the Current Punch (the first punch foun d). The example
shows that the first punch found is 100.