Kodak HR 500 Installing the Software for the Long Roll Accessory

Using the Long Roll Accessory

D-2 August 2001

Installing the Software for the Long Roll Accessory

1. With the PC powered off, power on the scanner.

2. Wait for the series of 3 beeps to sound at the scanner (or for the lamp to

illuminate).

You must have version 2.0 or higher of SAM (Service and Assembly Module)

diagnostic software installed on the host computer and v ersion 2.0 or higher of

firmware on your scanner.

1. Go to:

http://www.kodak.com/global/en/service/software/hr500/navigation.shtml

2. If the version numbers for either the SAM diagnos tic software or firmware are

higher than what is now installed on your scanner, follow the instructio ns on

the Web site to download the newer versions of SAM and the HR 500

firmware.

3. Follow the installation instructions on the Web site.