Kodak HR 500 Setting the Trigger Points at the Scanner

Using the Long Roll Accessory
August 2001 D-37
Setting the Trigger Points at the Scanner
1. On the left side of the scanner:
a. Move SET/ADJ/RUN to ADJ.
b. Press MODE to increment the number (or press TEACH to decrement th e
number) to the value you determined to be the left trigger point.
c. Move SET/ADJ/RUN to RUN.
2. On the right side of the scanner:
a. Move SET/ADJ/RUN to ADJ.
b. Press MODE to increment the number (or press TEACH to decrement th e
number) to the value you determined to be the right trigger point.
c. Move SET/ADJ/RUN to RUN.
3. Close the plastic cover.
P192_1565BC
TEACH ADJ MODE
SET RUN DL
P192_1565BCA
plastic cover