Extron electronic AVT 200HD manual Symbol Definitions for IP-specific Commands, X4#, X5# X5$

Symbol Definitions for IP-specific Commands

X4!	=	Port number	01–99(represented as two ASCII characters with
			leading zero if required
X4@	=	Command data section	Factory default name (model name + last 3 pairs of
			MAC address)
X4#	=	GMT offset	–12.0through +14.0. Represents hours and minutes
			offset from Greenwich mean time (GMT).
X4%	=	On and off status	0	= off or disabled
			1	= on or enabled
X4^	=	Dirty RAM status	0	= Random access memory has been saved to flash
			1	memory (OK to power off or reset).
				= RAM needs to be saved to flash memory
X5!	=	Firmware version number	n.nn (listed to two decimal places)
X5@	=	Unit name	Up to 24 characters: alphabetical (A–Zor a–z), digits
			(0–9), or hyphen (-).

NOTES: • The following characters are invalid or not recommended in names:
	{space} + ~ , @ = ` [ ] { } < > ‘ ’	“ ” ; : \ and ?.
•	The first character must be alphabetical.
•	The last character must not be a hyphen.

X5#

X5$

X5^

X5&

X5*

X5(

=	Local date and time format	For setting:
		In the format MM/DD/YY•HH:MM:SS
		MM = month: 10 (January) through 12 (December)
		DD = 01 through 31
		YY = 00 through 99
		HH = 00 through 23
		MM = 00 through 59
		SS = 00 through 59
		For reading:
		In the format Day,•DD•Mmm•YYYY•HH:MM:SS:
		Day = weekday: Mon through Sun
		DD = 01 through 31
		Mmm = month: (Jan through Dec)
		YYYY = year: 2000 through 2099
		HH = 00 through 23
		MM = 00 through 59
		SS = 00 through 59
=	IP address	nnn.nnn.nnn.nnn
		(Leading zeros in each of the four fields are optional
		for setting values and are suppressed in returned
		values.
		Factory default address: 192.168.254.254
		Default broadcast IP address: 255.255.255.255
= Power-up delay between ports in		1 through 255.
	1/3 second increments.	Default = 3, or 1 second.
= Time (in 10-ms increments) to wait		10 through 32767
	for characters to come into a serial	Default = 10, or 100 ms
	port before terminating the
	connection
= Time (in 10-ms increments) to wait		2 through 32767
	between characters before	Default = 2, or 20 ms
	terminating the connection
=	Hardware (MAC) address	00-05-A6-xx-xx-xx

AVT 200HD Tuner • Remote Configuration and Control 56