Extron electronic AVT 200HD manual EX2%NG, EX2RATE, EX2&OPOL

Command		ASCII Command	Response	Additional Description
		(Host to Tuner)	(Tuner to Host)
RF Input and Channel Selection (continued)
Presets (continued)
Name preset		EX2%,X2#NG}	NmgX2%,X2#]	Assign name X2# to preset X2%.
				Command character is a comma.
				Presets can have up to eight
				characters.
NOTE:	The following characters are invalid in preset names:
	~ @ = ` [] {} <> ’ ‘ “ ” ; (semicolon) : (colon) / \ ? and space.
Example:		E2,NBC–LANG}	Nmg2,NBC–LA]	Name preset 2 “NBC–LA.”
View preset name		EX2%NG}	NmgX2%,X2#]	View the name of preset X2%.
NOTES:	• If no preset is assigned to the X2% number that was entered, the name is shown as [unassigned].
	• If a channel preset is saved but not named, its default name is Presetnn.
	• If you try to name an unassigned preset, error code E11 is displayed.
	• If you try to recall a preset number to which no channel has been saved, error code E11 is displayed.

Channel Selection in Preset Mode

Select channel by preset	X2%T
number
Increment preset	+T
Decrement preset	–T––
Previous preset	0T
View current preset	T
View physical channel for	*T
current preset

TvprRX2%*X!.X@]	Select preset X2% (to select
	channel X!.X@).
TvprRX2%*X!.X@]	Select the next preset number
	in ascending order (to select
	channel X!.X@).
TvprRX2%*X!.X@]	Select the next preset number in
	descending order.
TvprRX2%*X!.X@]	Return to the previously selected
	preset.
TvprRX2%*X!.X@]	Show the current preset channel
	name and number.
TvprRX2%*X#]	Show current physical channel
	X# for preset X2%. X# = 1–135.

			The physical channel number
			corresponds to a 6 MHz
			frequency range (see the
			Frequency Tables in the
			“Reference Information”
			section).
Video Output
Set output resolution and rate	EX2^RATE}	RateX2^]	Select output resolution and
			refresh rate X2^. For X2^:
			0	= 480i @ 59.54 Hz
			1	= 480p @ 59.94 Hz
			2	= 720p @ 60 Hz
			3	= 1080i @ 60 Hz
View output resolution and	ERATE}	X2^]	Show the current output
rate			resolution and refresh rate.
Set output polarity	EX2&OPOL}	OpolX2&]	Set the polarity for the RGBHV
			output.
View output polarity	EOPOL}	X2&]	Show the current output polarity
			setting.
Select display aspect ratio	ETX%ASPR}	AsprTX%]	Select output screen type X%.
			For X%:
			0	= 16x9
			1	= 4x3
View display aspect ratio	ETASPR}	X%]	Show the current display type.

AVT 200HD Tuner • Remote Configuration and Control 47