Extron electronic manual AVT 200HD Tuner Installation

3.Click Next. On the next screen, make sure that the Install the software automatically (Recommended) radio button is selected, then click Next. (You do not need to insert a disc.)

Figure 11. Selecting the Radio Button to Install the USB Driver Automatically

Your computer locates the driver needed for it to communicate with the AVT 200HD via the USB port. This driver is loaded to the computer hard drive when the AVT configuration program is installed.

4.When the Completed screen appears, click Finish to close the wizard.

NOTE: This wizard appears only the first time you connect the AVT to each USB

port. You do not see the wizard again unless you connect the AVT to a different USB port on your computer.

5.Configure the AVT as desired, using SIS commands or the AVT 200HD Configuration and Control Program (see the “Using SIS Commands” section for information on available commands, or see the configuration and control program help file).

AVT 200HD Tuner • Installation 12