Extron electronic AVT 200HD manual Executive Mode Front Panel Lockout, Information Requests

Command	ASCII Command	Response	Additional Description
	(Host to Tuner)	(Tuner to Host)

Other Settings (continued)

Show HDCP for output display E O HDCP}	X1!]
	In verbose mode:
	HDCPOX1!]

Show HDCP compliance X1! for the display. For X1!:

0 = output connected with encrypted input but not HDCP compliant

1 = output connected with encrypted input and HDCP compliant

2 = No output connected

3 = Output connected, input not encrypted or not connected, output HDCP status unknown

Executive Mode (Front Panel Lockout)

Enable executive mode 1	1X	Exe1]	Select executive mode 1: block
			all front panel access (IR remote
			control is available).
Enable executive mode 2	2X	Exe2]	Select executive mode 2: block
			all front panel access except
			volume control (IR remote control
			is available).
Enable executive mode 3	3X	Exe3]	Select executive mode 3: block IR
			remote control access only.
Disable executive mode	0X	Exe0]	Turn executive mode off.
View executive mode status	X	X1@]	View current executive mode.
Information Requests
General information	I	TvtmX1)•TvctX!.X@•SigX3!]
			Show the currently selected
			tuning mode (X1)), channel
			(X!.X@) and signal strength level
			(X3!).
			For X1):
			0 = tune mode.
			1 = preset mode.
			X! = 1–135; X@ = 1–99
			X3! = 1–100%
Example:	I	Tvtm1 Tvct004.01 Sig042]

Query firmware version	Q	n.nn
		In verbose mode:
		Ver1*n.nn]
Query part number	N	60-770-01]
		In verbose mode:
		Pno 60-770-01]
Internal temperature	E20STAT}	X1#]
		In verbose mode:
		StatX1#]

The AVT is in tune mode; channel 4.1 is selected; signal strength is 42%.

Show the current firmware version to two decimal places.

Show the unit part number.

Show the internal temperature in degrees Fahrenheit.

X1# = +nnn.nn

AVT 200HD Tuner • Remote Configuration and Control 54