Extron electronic AVT 200HD manual X6#, X6$, X7#, X7$

X6) = Subnet mask

X6! = Message length, delimiter value, or byte count (via the serial port). (This parameter is optional.)

X6@ = Verbose mode

nnn.nnn.nnn.nnn

(Leading zeros in each of the four fields are optional for setting values and are suppressed in returned values.

Default = 255.255.0.0

nL = Length of message to be received nD = Delimiter value

n = byte count (1 through 32767; default is 0) Placed in front of the parameter (nD or nL)

0 = clear or none (default for Telnet connection)

1 = verbose mode (default for RS-232 connection)

2 = tagged responses for queries

3 = verbose mode and tagged responses for queries

NOTE:		If tagged responses is enabled (modes 2 and 3), all read commands return the constant
		string and the value as the set command does (for example, the read name command
		ECN} returns Ipn•X5@]).
X6#	=	Priority status for receiving timeouts 1 = use Send data string parameters (if they
			exist) (default).
			2 = use Configure receive timeout command
			parameters instead.
X6$	=	IP address converted into a single
		32-bit number
		Example: 10.13.0.254 becomes (10*256*256*256) + (13*256*256) +
		0*2456) + 254, which becomes (167,772,160 + 851,9678 + 254, which equals
		68,624,382.
X6%	=	Baud rate	9600 (default), 19200, 38400, 115200
X6^	=	Parity	Odd, Even, None (default), Mark, Space (Only the
			first letter is required.)
X6&	=	Data bits	7, 8 (default)
X6*	=	Stop bits	1 (default), 2
X6(	=	Port type	0 = RS-232 (default)
X7)	=	Flow control	Hardware, Software, None (default) (Only the first
			letter is required.)
X7!	=	Data pacing	Specified in milliseconds between bytes:
			0000 through 1000 (default = 0 ms)
X7@	=	Password	12 characters maximum

NOTE:	The following characters are invalid in passwords:
	{space} + ~ , @ = ` [ ] { } < > ‘ ’	“ ” ; : \ and ?.

X7#	=	Daylight saving time	0 = off or ignore
			1 = USA (Begins second Sunday in March and ends first
			2	Sunday in November.)
				= Europe (Begins last Sunday in March and ends last
			3	Sunday in October.)
				= Brazil (Begins third Sunday in October and ends
				third Sunday in February.)
X7$	=	Event number	0 through 99 (event must be running)
X7%	=	Event buffer	0 = receive
			1	= unified
			2	= data
			3	= NVRAM
X7^	=	Event buffer offset	0 through maximum buffer size

AVT 200HD Tuner • Remote Configuration and Control 57