Specifications, RF video input | Extron electronic AVT 200HD

Reference

Information

This section provides reference information on the AVT 200HD. The following topics are covered:

•Specifications

•Part Numbers and Accessories

•Mounting the Tuner

•IP Addressing

•Frequency Tables

Specifications

RF video input

Number/signal type	1 radio frequency (RF)
Connector	1 female F connector
Level	ATSC: -80 dBm to -5 dBm
	Cable: -62 dBm to -32 dBm
Impedance	75 ohms
Frequency range	54 MHz to 863 MHz
ATSC channels	2-69
Cable channels	1-135 (clear QAM channel)

Signal processing

Video	ATSC 8-VSB demodulation
	64/256 QAM demodulation
	MPEG2 main profile high level video decoding
Audio	5.1 channel Class A Dolby® Digital audio decoding
	PCM audio decoding

Video output — analog

Number/signal type	1 RGBHV
	1 component video
	1 S-video
	1 composite video
Connectors	5 female BNC
	3 female BNC
	1 female 4-pin mini DIN
	1 female BNC
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video
	0.7 Vp-p for RGB and for R-Y and B-Y of component video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0 V to 1.0 Vp-p
Impedance	75 ohms

AVT 200HDAVT200HDTuner Tuner•Reference• HTMLInformationOperation 95

Image 101

Extron electronic AVT 200HD manual Specifications, RF video input, Signal processing, Video output analog

Contents

AVT 200HD Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents Html Configuration About the AVT 200HD Tuner FeaturesAbout this Guide AVT 200HD Tuner Introduction Application Diagram for the AVT 200HD Application Diagram Installation Overview Installation Composite and S-video stacked video output connectors Rear Panel FeaturesVideo Output Connectors Analog audio output connectors Audio Output Connectors Digital audio output connectors Input ConnectorRemote Configuration and Control Connectors Ethernet Connection Wiring for RS-232 ControlControl Connections Wiring the IR Link Wiring for IR Control Connecting the AVT 200HD to the IR Link Connecting to the USB Port Found New Hardware Wizard Opening Screen AVT 200HD Tuner Installation AVT 200HD Front Panel Front Panel Features NBC-4LA Hdcp Compliance Power-up and Default Cycle Screens Example Powering On Menu System Overview Using the menusMenus on the LCD Screen AVT 200HD Menu Flow Menu flow diagram Selecting the signal source Channel Setup MenuScanning for channels Option Scans for Scanning Cable Channels with long minor numbers Selecting tune or preset mode Output Configuration Menu Selecting a channel Saving presets Not available via the front panel Selecting the output resolution and refresh rate Recalling presets Resolution Composite Selecting the display modeSelecting the display aspect ratio Simultaneous Video Output Selecting the closed caption service Audio Configuration Menu Comm Setting Menu Flow Comm Setting Menus Configuring the serial port and IP parameters Viewing serial port and IP settings Unit Reset Menu Flow Unit Reset Menu Resetting from the Front Panel Exiting the Menu System Volume ControlResetting from the Rear Panel Reset Modes Summary Activation Result Purpose/Notes Locking and Unlocking the Front Panel Executive Modes Exec Mode Select Disable Executive Mode Menu Flow Using the AVT 200HD IR Remote Control Area for Remote Signal Reception Installing batteries in the AVT 100 Remote Buttons on the AVT 200 Remote Control Buttons on the AVT 200HD Remote Control Channel Selection buttons 0 through Selecting a Channel or Preset Using the IR Remote Control Introductory Display Using the On-screen Display OSDLocking IR Remote Control Access Channel Information Display Volume Level Display Program Guide USB Port Serial PortEthernet Port Ethernet Cable Establishing an Ethernet Connection Connection TimeoutsIP Address Tuner-initiated Messages Using SIS CommandsChip Security for Parental Control Copyright message With an RS-232 connection Using the Command/Response Tables for SIS Commands Tuner Error ResponsesError Response References Special Characters Symbol Definitions for AVT 200HD Specific CommandsX1@ X1# X3@ X3# X2@ X2# X2% EX!*X@TVSL Command/Response Table for AVT 200HD SIS Commands X2%TVPR EX!*X@TVCHX!*X@TVCH EX2&OPOL EX2%NGEX2RATE EX1TVPG EX1TVTMEX1TVOS X1% Fscc X1 TvccX1% X1 Fscc X1*FSCC X1&FSCCX2*FSCC Exafmt EX* Lang Chip Setup Parental ControlX1$ VolX1$ X3@ X3@*X1VCHP Chip SetupX3@*X2@VCHP X2@ Tvst ‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘ Other Settings$ Tvst Information Requests Executive Mode Front Panel Lockout EZI Resets X5# X5$ Symbol Definitions for IP-specific CommandsX4# X6$ X6#X7# X7$ X8$ X8# EX!CE Command/Response Table for IP-Specific SIS CommandsEX4!CP ECN EX5@CNEX5#CT ECT EX5$CI EDHECI ECH EX4@ *X10# *X10$ PB BptX4@ *X5 BmdX9% ,X5$EX7$ ,X5$ ID EdiX7$ *X5$ *X4@ X7$ = 0 EMH EX4@MHEX4@MD EMD EX7$ ,X7% ,X7 ,X7*X7& E EvtX7$ ,X7% ,X7 ,X7 EX7$ ,X7% ,X7 ,X7& E EX7$ ,X7% ,X7 ,X8 FE EvtX7$,X7%,X7, string Computer System Requirements Accessing the AVT 200HD Configuration & Control SoftwareDownloading and Installing the Software from the Web Software Button on the DVD Opening Screen Installing the Software from the Disc Starting the Software Communication Setup Window with Telnet Tab RS232 Connection Tab Setup Tab on the Main Window Updating the Firmware Using the Configuration & Control Program Help File Extron Firmware Loader Window for AVT 200HD Firmware Update in Progress Html Accessing the Web Pages Special Characters Example of a Network Password Dialog Box System Status System Status System Settings Configuration Pages Unit Name field IP Settings Fields Date/Time Settings Fields Date/Time Settings Fields Tuner Settings Tuner Settings Channel Scan section Edit Channels and Presets sectionTo hide a channel To show a hidden channel Executive Mode Output Setup section Removing passwords PasswordsSetting a password Firmware Upgrade Firmware Upgrade Choose File Window with a Firmware File Selected Uploading Files File Management Other File Management Activities Adding a Directory User Control Control Pages Keypad Selecting a presetAdjusting the volume Closed Captioning Closed Captioning Text Size Text Style Text Fill Text Color Chip Chip Screen Movie Rating Parental Control section Maximum Allowed TV Rating for Ages section TV Rating Parental Control section Change PIN section Signal processing SpecificationsRF video input Video output analog Sync Video output digitalAudio output analog Audio output digital General Power VAC to 240 VAC, 50-60 Hz, 25 watts, internal Optional Accessories Part Numbers and AccessoriesIncluded Parts Cables UL Guidelines for Rack Mounting Rack Mounting ProcedureMounting the Tuner IP Addressing What is an IP Address?Choosing IP Addresses Class Name Valid Address Range Identifier Arrangement Pinging for the IP Address Subnet MaskPinging to determine the Extron IP address Class Name Subnet Mask Pinging to determine the web IP address Connecting as a Telnet Client Telnet tips Connecting to the AVT Open command Gateways Subnetting a PrimerLocal and remote devices IP addresses and octets Determining whether devices are on the same subnet Subnet masks and octetsUnmasked octets are compared indicated by ? in figure Masked octets are not compared indicated by X in figure Atsc Frequency Table Frequency TablesPhysical Lower Edge Video Audio Upper Edge Channel Atsc Frequency Table HRC Cable Cable Frequency Table Physical Channel Visual Carrier Frequency MHz Cable Frequency Table Cable Frequency Table Europe, Africa, and the Middle China East USA, Canada, South America Japan Central AmericaAsia Middle East Europe