Extron electronic AVT 200HD Starting the Software, Communication Setup Window with Telnet Tab

Starting the Software

To run the AVT 200HD Configuration & Control Program:

1.Click on the AVT200HD.exe icon (shown at right) in the Extron Electronics group or folder in the Start menu. You can access this icon by selecting

Start > All Programs > Extron Electronics > AVT 200HD > AVT 200HD.

After a few seconds, the Communication Setup window opens, in front of the control program main window.

Figure 38. Communication Setup Window with Telnet Tab

2.On the Communication Setup screen, select the tab for the desired connection and enter the requested information:

•Telnet (shown above): For an IP connection over Telnet, enter the IP address for your AVT, the Telnet port number (23 is the default), and the password if one has been set.

NOTE: If your local system administrators have not changed the value, use the factory-specified default address, 192.168.254.254, in this field.

AVT 200HD Tuner • Remote Configuration and Control 68