Extron electronic AVT 200HD manual Reset Modes Summary Activation Result Purpose/Notes

Reset Modes Summary

Mode	Activation	Result		Purpose/Notes
1	Hold in the Reset button while	Restores the factory-installed firmware.		Mode 1 can be
	applying power to the tuner.	All user settings and files, such as audio		used to remove a
		adjustments and IP settings, are retained.		version of firmware
		Event scripts do not run when the tuner		if compatibility issues
		is powered on in this mode.		arise.
3	Hold in the Reset button until	Turns events on and off. During		Mode 3 is useful for
	the Reset LED blinks once (after	resetting, the Reset LED flashes two		troubleshooting.
	approximately 3 seconds); then within	times if events are starting or three times
	1 second press Reset momentarily	if events are stopping.
	(for less than 1 second).
4	Hold in the Reset button until the	•	Enables ARP capability.	Mode 4 enables you
	Reset LED blinks twice (once after	• Sets the IP address, subnet address,		to set IP address
	approximately 3 seconds and again			information using the
			and gateway address to the factory
	after 6 seconds); then within 1 second			ARP command and
			defaults.
	press Reset momentarily (for less than			the MAC address.
		• Sets port mapping to the factory
	1 second).			It does not replace
			default.	any user-installed
		•	Turns DHCP off.	firmware.
		•	Turns events off.
		The Reset LED flashes four times in quick
		succession during the reset.
5	Hold in the Reset button until the	Performs a complete reset to factory		Mode 5 is useful if
	Reset LED blinks three times (once	defaults (except the firmware):		you want to start over
	after approximately 3 seconds, again	• Does everything mode 4 does.		with configuration
	after 6 seconds, and then again after			and uploading and
		• Resets almost all real time
	9 seconds); then within 1 second			also to replace events.
			adjustments:
	press Reset momentarily (for less than
			• Clears the channel list, all presets,
	1 second).
			and audio settings.
			• Resets all IP options.
			• Clears all files from the tuner.
		The Reset LED flashes four times in quick
		succession during the reset.

AVT 200HD Tuner • Operation 30