Extron electronic AVT 200HD manual Output Configuration Menu, Selecting tune or preset mode

Output Configuration Menu

From this menu, you can set output parameters, including resolution and refresh rate, display aspect ratio, and closed captioning. This menu also enable you to select the operating mode (tune or preset).

CHANNEL

SETUP

Menu

	OUTPUT	Next	TUNER MODE			Next	RESOLUTION
CONFIGURATION					TUNE		1080i @ 60
Use either Adjustment knob
to select a submenu option.
			•	TUNE (default)		•	480i @ 59.94
Next			•	PRESET		•	480p @ 59.94		Next
						•	720p @ 60
						•	1080i @ 60 (default)
CLOSED CAPTION		Next	DISPLAY MODE			Next	DISPLAY TYPE
	OFF				FOLLOW			16 X 9
•	OFF (default)			•	FILL		•	16 x 9 (default)
•	SERVICE 1			•	FOLLOW (default)		•	4 x 3
•	SERVICE 2			•	ZOOM

•SERVICE 3

•SERVICE 4

•SERVICE 5

•SERVICE 6

Figure 20. Output Configuration Menu

The tasks accessed from the Output Configuration submenus include:

•Selecting tune or preset mode (Tuner Mode submenu)

•Selecting the output resolution and refresh rate (Resolution submenu)

•Selecting the display aspect ratio (Display Type submenu)

•Selecting the display mode (Display Mode submenu)

•Selecting the closed caption service (Closed Caption submenu)

Selecting tune or preset mode

The AVT 200HD has two tuning modes: tune and preset. You can use the front panel menus, the Windows-based control software, SIS commands, the embedded web pages, or the AVT 200HD Remote Control to switch between modes.

•Tune mode: In tune mode, the Up (>) and Down (<) buttons increment and decrement the channel number with each press of the button. If a button is held down for 2 seconds, the channels tune rapidly up or down until the button is released. Tune mode is the default.

In this mode, you can also do the following:

•Scan for available channels and save them to memory (see “Scanning for channels,” earlier in this section).

•Save (associate a channel with) a preset. You can do this using SIS commands, the AVT 200HD IR Remote Control, the HTML (web) pages, or the Windows-based control software. You cannot save a preset from the front panel.

AVT 200HD Tuner • Operation 21