Extron electronic manual Buttons on the AVT 200HD Remote Control

Buttons on the AVT 200HD Remote Control

The following functions are available through the buttons on the AVT 200HD IR Remote Control:

1

14

13

12

11

10

9

MUTE

VIDEOAUDIO

CHANNEL TUNE VOLUME

PRESET

CHANNEL SEL ECTION

1 2 3 CC

4 5 6

7 8 9 SAVE

0ENTER

LAS T

SHIFT

INFO GUIDE FREEZE

2

3

4

5

6

7

8

AVT 200HD Remote

Figure 29. Buttons on the AVT 200 Remote Control

AVideo and Audio Mute buttons — Toggle video and audio output muting on and off.

•When the channel is changed, the video is unmuted.

•When the volume is adjusted, the audio is unmuted.

BPreset — Puts the AVT in preset mode. In preset mode, the Channel Selection buttons

(B) switch between preset channels.

CVolume — Press the top (up arrow) or bottom (down arrow) section of this rocker button to raise or lower the output volume.

DCC — Selects a closed captioning service (CC1 through CC6) or turns it off.

ESave — In tune mode, saves the currently selected channel as a preset. (Presets cannot be saved while the AVT is in preset mode.)

FEnter — After using the numbered selection buttons (L) to select a channel or preset number, press this button to switch to that channel or preset.

GShift buttons — After the Guide button (I) is pressed:

•The up and down arrow buttons step through the program menu on the on- screen display.

•The left arrow button lets you back-space and delete numbers that you entered

on the LED panel by pressing the channel selection buttons (L). This button does not delete numbers after you press the Enter button to confirm your selections.

•The right arrow button is reserved for future use.

HFreeze — Freezes and unfreezes the video output.

AVT 200HD Tuner • Operation 34