Manuals / Nikon / Computer Equipment / Scanner

Nikon manual When transporting the scanner, Nikon LS-200035 mm Film Scanner User’s Guide

Models: LS-2000

1 47

Download 47 pages 52.86 Kb

Page 8

When transporting the scanner

When transporting the scanner

The LS-2000 is for use only in the country of sale. Nikon will not be held responsible for consequences resulting from use overseas.

The scanning mechanism must be locked in its home position for transport within the country. To return the scanning mechanism to its home position, remove any adapters from the adapter slot and then turn the scanner on. The status LED will blink while the scanning mechanism returns to the home position. Wait until the status LED glows steadily, then turn off and unplug the scanner. Place the guard in the adapter slot as shown below, sliding it in until it contacts the back of the slot.

Remove the transport locking screws from the rear panel and screw them into the holes provided in the side panel and the mouth of the adapter slot (the hole in the mouth of the slot should align with the hole in the guard). Close the front cover and pack the scanner and adapters in the original packing material for transport.

✔Caution: Do not transport the scanner without first locking the scanning mechanism with the transport lock screws. Moving the scanner without the lock screws in place could damage the mecha- nism.

vi	Nikon LS-2000 35 mm Film Scanner User’s Guide

Image 8

Nikon manual When transporting the scanner, Nikon LS-200035 mm Film Scanner User’s Guide

Contents

Page Page 35 mm Film Scanner LS-2000Users Guide Symbol CautionsTrademark Information SymbolCAUTIONS Notice for customers in CanadaNotice for customers in European countries ModificationsSafety Precautions Keep cleanDo not disassemble Do not modifyDo not place foreign objects inside the scanner When not using for an extended periodWhen performing routine maintenance When transporting the scanner Nikon LS-200035 mm Film Scanner User’s GuideCautions on certain copies and reproductions Comply with copyright noticesContents ContentsParts and Accessories Setup1. Overview 1. OverviewThe chapters that follow provide a step-by-stepguide to installing your scanner and using Nikon Scan to scan 35 mm slides or strip film. The next chapter, Parts and Accessories, lists the things you should find packaged with your LS-2000and names the parts of the scanner. This is followed by “ Setup,” which guides you through the process of connecting your scanner to a computer and installing Nikon Scan. “ Scanning” outlines the steps involved in using Nikon Scan to scan slides and strip film. A separate reference section lists the controls available in Nikon Scan. We hope that you find this manual useful 1. Overview2.1What’s in the Box 2.Parts and Accessories2.Parts and Accessories 2.2Parts of the LS-2000 2.Parts and Accessories3. Setup 3.1Setting up the LS-20003. Setup Step 1-Choosea location for the scannerWhen installing the scanner on its base 3. Setup3. Setup When installing the scanner on its sideStep 2-Removethe transport locking screws Step 3-Connectthe power cable Safety PrecautionsAt voltages of more than AC At voltages of AC 125V or less3. Setup Do not plug the power cord intoStep 4-Connectthe SCSI cable 3. SetupWhen the scanner is the last device in the chain 3. SetupScanner only external device in chain Scanner last of several external devicesWhen the scanner is between other devices 3. SetupSafety Precautions SCSI connection checklist3. Setup Nikon LS-200035 mm Film Scanner User’s Guide Step 5-Setthe scanner’s SCSI ID3. Setup 3. Setup Nikon LS-200035 mm Film Scanner User’s Guide3.2Software Installation Step 1-Reviewthe system requirementsMacintosh 3. SetupStep 2-InstallAdobe Acrobat Reader Windows3. Setup WindowsMacintosh Step 3-InstallNikon Scan3. Setup Windows from disk provided by hardware3. Setup After turning on your computer, place the Nikon Scan CD in the CD-ROMdrive. The folder shown below will open on the desktop 3. SetupMacintosh 4. Scanning 4. ScanningStep 1-Turnon your computer Step 2-StartNikon ScanInserting the MA-20SLIDE Step 3-Insertan adapter in the scanner4. Scanning Inserting the SA-20STRIP FILM Cautions4. Scanning Step 4-Insertfilm 4. ScanningStep 5—Choosea film type Step 6-Choosea color space4. Scanning Cautions4. Scanning Step 7—Choosea thumbnail SA-20Step 8-Performa preview scan 4. Scanning Step 10-Autocontrast adjustmentStep 9-Selecta crop Step 11-Removedust and scratches 4. Scanning4. Scanning Step 13-Scanthe selected cropStep 14-Scanadditional images 4. Scanning Once the scan window has been re-opened,the current slide or film strip can be previewed and a new crop selected as outlined in steps 5 through 12, or the current film can be ejected and new film inserted and previewed. To eject a slide from the slide-mountadapter, press the eject button and then pull the slide the rest of the way out with your fingersAppendix Nikon Scan Controls Appendix Nikon Scan ControlsMenus, Tabs, and Information Displays Buttons Appendix Nikon Scan ControlsControl Drawers The Scan-SizeDrawerThe Scanner Extras Drawer Appendix Nikon Scan ControlsAppendix Nikon Scan Controls The Curves-and-LevelsDrawerThe Color-BalanceDrawer Preferences Appendix Nikon Scan ControlsGamma Color managementERKLÄRUNG ÜBER EG-NORMENGERECHTHEIT EC DECLARATION OF CONFORMITYDECLARATION DE CONFORMITÉ DE LA CEE DECLARACIÓN DE CONFORMIDAD DE LA CEE