4. Scanning
✔Cautions
•Examine the film for use in the SA-20 carefully prior to scan- ning. Film must be flat or curl slightly towards the emulsion surface (film should fit in the gauge on top of the adapter). Film cannot be used in the adapter if:
•there is tape on the film
•the film has been folded
•the perforations have been torn
•the film has been cut on an angle or torn
Film that cannot be scanned in the SA-20 can be scanned in the MA-20 slide adapter using the FH-2 film holder (see the LS- 2000 Reference Manual).
•Film must be clean and free from fingerprints. In the case of the SA-20, the presence of dirt could cause damage to the film. Before scanning, remove dust with a blower and gently wipe off any finger prints with a soft, dry cloth.
Detailed information on the kinds of film appropriate for use in the LS-2000 and on inserting film, see the LS-2000 Reference Manual.
Step 5—Choose a film type
In the scan window, select a film type appropri- ate to the type of film (positive or negative) inserted in the scanner.
Step 6—Choose a color space
Choose a color space from among those listed in the color-space pop-up menu. The color spaces available depend on whether Nikon Color Management is used; see the software reference manual for your platform for details. By default, color spaces of calibrated RGB (sRGB), CMYK, and HSL are available.
